Cookies sur les sites Web Omega
Nous utilisons des cookies sur ce site Web. Ces cookies sont indispensables au bon fonctionnement de notre site.
Si vous continuez sans modifier vos paramètres, nous supposerons que vous êtes heureux de recevoir tous les cookies de notre site Web.
Pour de plus amples informations à ce sujet, veuillez cliquer ici
Fermer
Nous
appeler
maintenant
Panier  |  Contact  | 
0805 541 038  | 
NUMÉRO VERT 0805 541 038
INTERNATIONAL+33 01 57 32 48 17
Layer N Banner

Microstepping Motor Drives

3540M

Microstepping Motor Drives | 3540M

Microstepping Motor Drives

PASSEZ VOTRE COMMANDE
  • DC Bus Voltage 12 to 42 Vdc Motor Supply (Including Ripple)
  • Switch Selectable Motor Currents from 0.4 to 3.5 A/Phase
  • Optically Isolated 5 Vdc Inputs for Step, Direction and Enable
  • Enable Input to Turn Off Current to the Motor
  • Screw Terminal Connectors
  • MOSFET, Dual H-Bridge, Inaudible PWM Amplifier
  • 3 State, Pulse Width Modulated Current Control, Switching at 20 to 30 KHz
Variateurs et moteurs - Voir Les Produits Associés

Déscription

Click on this link if you need more information about Stepper motor.

The 3540M/MO step motor drivers are microstepping drives with up to 12,800 steps per revolution, step phase sequencer with MOSFET three state switching amplifiers and optoisolated circuits. Both drives include 5 optically isolated inputs, and the 3540MO features external speed control, tach output, and internal pots for accel/decel rate along with high/low speed range selection.

The 3540M drive is a step and direction drive, and includes an automatic feature (switch selectable) to lower motor current by 50% anytime the motor is left at rest for more than one second. Additionally there is a switch-selectable self-test which rotates the motor 1/2 revolution in each direction at 100 steps/second. This drive is compatible with PLCs which feature high-speed pulse output, such as our ELC-PLC series and OCS XL series.
Note: the Step, Direction, and Enable inputs are +5V-logic compatible. For operation with +24V signals, a 3600-ohm series resistor is required on each input. See the drive manual for details.

The 3540MO drive has an on-board oscillator which allows the motor speed to be controlled by an analog voltage or external joystick. This drive is ideal for continuous motion applications such as mixers and blenders. A tach output is also available on this drive.

Motor current for both drives is selected from 32 levels by a DIP switch. Microstepping resolution is selectable by DIP switch on the 3540M. On the 3540MO, microstepping resolution is fixed at 12,800 steps/revolution.

Learn more about stepper motors and drives: Introduction to Stepper Motors and Drives

Click here for more info on the ELC series PLC: ELC-PLC Series

Click here for more info on the OCS XL series PLC: OCS XL Series

Power Supply (Required for Drive Operation): Recommended: OMPS150A24
Placez votre commande(Veuillez spécifier la référence du produit)

Ce que d'autres personnes ont acheté: quand vous voyez cette icône, cliquez dessus pour afficher une liste des produits que d'autres personnes ont achetés en plus de ce modèle.

Code d'article/ Desc.
Qté
Déscription
  
3540M
Consultez le Service de ventes  
Stock: 
 
 
Microstepping step motor drive, 3.5 A/phase, 40 VDC
  
3540MO
Consultez le Service de ventes  
Stock: 
 
 
Microstepping step motor drive with digital oscillator
Recommended Motors
  
OMHT17-075
€114.28
Stock: 11 semaines
 
NEMA 17, 62.8 oz-in holding torque
  
OMHT23-397
Consultez le Service de ventes  
Stock: 
 
 
NEMA 23, 177 oz-in holding torque
  
OMHT23-400
Consultez le Service de ventes  
Stock: 
 
 
NEMA 23, 264 oz-in holding torque
Accessories
Cliquez pour agrandir / réduire une liste d'achat connexeOMPS150A24
OMPS150A24
Consultez le Service de ventes  
Stock: 
 
 
Stepper drive power supply, 24 VDC, 6.3A
† Tous les Montants indiqués Dans EUR
Notez: To see torque-speed curves for recommended motors, click on "Specs" above.

Manuels de Produit:

Télécharger 3540M - Step Motor Driver
Télécharger 3540MO Series - Step Motor Driver
We noticed you are from the US. Visit your local site for regional offers and live support.
Stay here.
Go to the the US site >