General Purpose Industrial Grade Accelerometers

ACC101

accelerometers

PASSEZ VOTRE COMMANDE

Industrial Accelerometers
Ideal for Machine Vibration Monitoring
Low Impedance Drives Cable Lengths to 300 metres
Fast Turn-on Time (1 Sec.)
100 mV/g Output

Mesure dynamique - Voir Les Produits Associés

Déscription

Find how an accelerometer works on this link.

The ACC101 accelerometer is low cost yet extremely durable. These accelerometers are constructed using high strength aluminium, and feature a rugged strain relief, ¼-28 stud mounting, an epoxy seal, and use the kind of dependable components usually found only in higher priced accelerometers.

SPECIFICATIONS
Excitation: 2 mA nominal @ 24 to 30 Vdc, constant current (18 volt supply can be used but will limit amplitude range)
Rated Output: 100 mV/g nominal @ 100 Hz
Frequency Range: 3 Hz to 5 kHz (up to ±10 % rated output shift)
Amplitude Range: ±80 g peak with ACC-PS3A power supply/amplifier
Amplitude Linearity: ±1% up to 65 g peak
Temperature Range: -18 to 82°C
Temperature Sensitivity Effect:
-54 to 38°C ≤ 5% FS
38 to 121°C ≤ 8% FS
Thermal Shock: 1.2 g /°C
Transverse Sensitivity: 5% of axial maximum
Maximum g Without Damage: 5,000 g peak
Maximum g Without Clipping: ±80 g peak
Mounted Resonance Frequency: >18 kHz
Output Impedance: 50 Ω nominal
Bias Voltage: 10 V nominal
Base Strain: 0.002 g/microstrain max.
Noise Floor (wideband): 0.00025 g (rms)
Weight: 50 grams nominal (without cable)
Material: Aluminium, hard anodised thermal insulating boot included
Dimensions: 3.81 H x 2.54 cm hex base
Connector: 3 metre integral coaxial cable with BNCM
Mounting: 1/4-28 removable stud
Mounting Torque max: 40 cm-kg (35 in-lb)

Placez votre commande(Veuillez spécifier la référence du produit)

Ce que d'autres personnes ont acheté: quand vous voyez cette icône, cliquez dessus pour afficher une liste des produits que d'autres personnes ont achetés en plus de ce modèle.

Code d'article/ Desc.

Qté

Déscription

ACC101

Consultez le Service de ventes

Stock:

Accelerometer with 3 metre cable

Accessories

MAGNET1

€124.62

Stock: 1 semaine

Magnetic mounting base 4.5 kg holding force (10 lb) 19 mm diameter x 19 mm high.

Amplifiers and Power Supplies

ACC-PS3A-230VAC

Consultez le Service de ventes

Stock:

230 Vac powered constant current power supply (BNCF connections)

Interface cables used between power supply and instrumentation

ACC-CB4-6

Consultez le Service de ventes

Stock:

1.8 metre long coaxial cable (BNCM/BNCM)

ACC-CB4-15

€82.21

Stock: 1 semaine

4.5 metre long coaxial cable (BNCM/BNCM)

ACC-CB5-2

€71.39

Stock: 8 semaines

60 cm long coaxial cable (BNCM/banana plug)

ACC-CB6

€31.80

Stock: 1 semaine

175 mm long coaxial cable (BNCM/pigtail)

† Tous les Montants indiqués Dans EUR
Exemple de commande: (1) ACC-CB5-2 60 cm long output cable for amplifer. BNC to banana plugs, €71.39

Produits Liés:

ACC-PS3A and ACC-PS4A
Achetez maintenant →
Accelerometer Power Supplies. AC Powered Single Channel and Triaxial - Not CE Certified

ACC-CABLES
Achetez maintenant →
Input/output Cables for Accelerometers, Power Supplies and Instrumentation

BOS Series
Achetez maintenant →
Benchtop Oscilloscope