Cookies sur les sites Web Omega
Nous utilisons des cookies sur ce site Web. Ces cookies sont indispensables au bon fonctionnement de notre site.
Si vous continuez sans modifier vos paramètres, nous supposerons que vous êtes heureux de recevoir tous les cookies de notre site Web.
Pour de plus amples informations à ce sujet, veuillez cliquer ici
Fermer
Panier  |  Contact  | 
NUMÉRO VERT 0805 541 038
INTERNATIONAL+33 01 57 32 48 17
Layer N Banner

  Discontinued - accéléromètre triaxial

ACC301A

accéléromètre triaxial | ACC301A

accéléromètre triaxial

  • 10 mV/g Output per Axis
  • Ideal for Monitoring Vibration in Three (X-Y-Z) Planes
  • Weighs Only 13.6 Grams Due to Titanium Construction
  • Very Low 15 uV noise floor
Mesure dynamique - Voir Les Produits Associés

Déscription

OMEGA’s model ACC301A triaxial accelerometer is ideal for lightweight single-point monitoring of vibration in three (X-Y-Z) planes. This accelerometer has a very low noise floor and a wide frequency range of up to 10 kHz at 3db. The ACC301A accelerometer weighs only 13.6 grams, yet its titanium construction makes it very rugged.

SPECIFICATIONS
Excitation: 2 mA nominal @ 15 to 30 Vdc, 1 to 6 mA max constant current
Sensitivity @ 100 Hz, ±5%: 10 mV/g - 1.02 mV/(m/s²)
Frequency Range ±5%: 3 Hz to 7 kHz
Frequency Range ±10%: 2 Hz to 8 kHz
Frequency Range ±3db: 1 Hz to 10 kHz
Turn on Time (2% of final bias): <5 Seconds
Amplitude Range @22°C: ±500g
Mounted Resonance:>25 khz
Transverse Sensitivity:<5%
Temperature Range: -40 to 121°C
Base Strain: 0.0005 g peak/ustrain
Shock Limit: 5,000 g
Noise Broadband 2.5 Hz to 25 kHz: 1500 u (rms)
Noise Spectral 10 Hz: 100 ug/sqrt Hz (rms)
Noise Spectral 100 Hz: 25 ug/sqrt Hz (rms)
Noise Spectral 1000 Hz: 10 ug/sqrt Hz (rms)
Output Impedance: 1000 Ω
Isolation:Isolated, >100 Meg Ω
Noise Rejection (EMI/RFI):>52 db
Bias Voltage: 7 Vdc
Weight: 13.6 grams nominal (without cable)
Case Material: Titanium
Design: Isolated Compression
Environmental Seal: Splashproof epoxy
Dimensions: 21 x 21 w x 28 mm d
Connector: Side 4-pin, ¼-28 female termination, cable sold separately (order Model No. ACC-CB3-6)
Mounting: 10-32 removable stud
Mounting Torque Max: 2.2 N-m (20 in-lb)
Tous les Montants indiqués Dans EUR
Exemple de commande:  (1) ACC-CB3-6 Cable for connecting accelerometer to PSU, €336.76  plus (1) ACC-PS4A-230VAC Power Supply, €925.00 , €336.76 + 925.00 = €1,261.76
We noticed you are from the US. Visit your local site for regional offers and live support.