Cookies sur les sites Web Omega Nous utilisons des cookies sur ce site Web. Ces cookies sont indispensables au bon fonctionnement de notre site. Si vous continuez sans modifier vos paramètres, nous supposerons que vous êtes heureux de recevoir tous les cookies de notre site Web. Pour de plus amples informations à ce sujet, veuillez cliquer ici
Suited for Higher Temperatures or Corrosive Environments
Protect Controls and Components Indoor or Outdoors
Flammability Rating V-0 per UL 94
UV Stabilized for Outdoor Use
Molded-in Hinge with Stainless Steel Hinge Pin
Solid or Clear Cover with Screw or Latch Closures
Molded-in Bosses for Direct Mounting of DIN Rail
Raised Cover with Additional Depth for Optional Front Panel
Optional Sub-Panels Available
Factory Installed Mounting Flanges or Polycarbonate Mounting Feet Included
Use our finder to select the best enclose for your application.
Déscription
AMP Series non-metallic polycarbonate
enclosures are designed to insulate and
protect electrical controls and components
in both indoor and outdoor applications
and are especially well suited for higher
temperatures and corrosive environments.
These IP66 rated plastic junction
boxes feature raised covers with a variety
of screw or latching options that allow you
to provide the level of security or ease of
access needed for each application.
Hinged models are constructed with a stainless
steel hinge pin and padlocking latches are
available in stainless steel or non-corrosive
plastic snap latches.
The AMP Series enclosures are well suitable
for mild acid conditions such as aluminium
chloride, boric acid, calcium chloride, sea
water, sodium nitrate and zinc chloride.
AMP Series plastic enclosures are
available with the added feature of a raised
cover. The cover adds an additional 22 mm
of depth to accommodate meters and
controllers, switches and other devices, and
can be used with the optional front panel
for maximum configuration within a single
enclosure.
Optional Panels
"AMP-PLA" panels are 2.5 mm thick aluminium rear mount sub-panels
"SCE" panels are 2 mm thick, white powder coated, carbon steel for rear mounting
"OM-HFPP" panels are 2.3 mm thick aluminium front panels that can be mounted in the front of the box and are adjustable to 38 mm deep into the box.
Specifications Temperature Rating: -35 to 107°C UV Rating: f1 per UL 746C Internal Mounting: #10-32 threaded brass inserts for sub-panel, plastic bosses for DIN rail for #10 sheet metal screws Standards: UL50, UL50E, UL508A and UL706C UL Types: 1, 2, 3, 4, 4x, 12 and 13 CSA-C22: No. 14 CAN/CSA-C22: No.94 CSA Types: 1, 2, 3, 3R, 4 4X, 12 and 13 NEMA Types: 1, 2, 3, 3R, 4, 4X, 12 and 13 IEC 60529: Type IP66 Construction
Materials: Injection moulded polycarbonate thermoplastic Hinge: Moulded hinge with 304 stainless steel pin Colour: Light grey – RAL#7035 Cover Seal: Closed cell neoprene, in continuous tongue and grove channel
† Tous les Montants indiqués Dans EUR I> Exemple de commande: (1) AMP1206F Electrical enclosure, 12 H x 10 W x 6, €107.93 plus (1) SCE-12P10 Steel sub-panel for 10 x 10 enclosure, €16.69 , €107.93 + 16.69 = €124.62
(1) OM-HFPP142 Aluminum front panel for 14 x 12, €79.13 plus (1) DRTB-RAIL-12 Pre-cut DIN rail for 12, €10.87, €79.13 + 10.87 = €90.00
Produits Liés:
DIN Rail Terminal Blocks, Feed Through and Ground Terminals