Lightweight Oil Immersion Heater with Thermostat. 1" NPT Steel Fitting

ARTMO Series

Oil Immersion Heater

^€609,31 ARTMO-500/120V

PASSEZ VOTRE COMMANDE

Built in Thermostat— Three Temperature Ranges Available
0.25 to 0.50 kW
120 and 240 V, 1 Phase
8 mm Diameter Heavy Duty Steel Sheath
Lower Watt Density for Heating Light Weight Oils
Single Heating Element Design

Thermoplongeurs - Voir Les Produits Associés

Déscription

More information about how a Immersion Heater works in this link or general information about industrial heater elements.

Heating low viscosity oil — For better flow, improved characteristics, and maintenance of bulk oil at predetermined temperature levels. Also suitable for hydrocarbon based coolants and heat transfer oils where adequate flow conditions are maintained.

Features rugged construction — Sturdy heating steel screw plugs provide superior rigidity and strength. Heavy duty jumper straps and terminal posts assure permanent tightness of connection’s carrying capacity.

High conductivity elements — Filled with highest purity blends of magnesium oxide refractory (MgO) compacted to a rock hard density to ensure maximum thermal conductivity, maximum electrical resistance, and assure long element life.

Placez votre commande(Veuillez spécifier la référence du produit)

Code d'article/ Desc.

Qté

Déscription

General Purpose Enclosure

ARTMO-250/120V

€507.36

Stock: 5 semaines

Temp.Range (60-187°F), .250 kW, 20 W/in2, 120 V

ARTMO-375/120V

€507.36

Stock: 5 semaines

Temp.Range (60-187°F), .375 kW, 20 W/in2, 120 V

ARTMO-500/120V

€609.31

Stock: 5 semaines

Temp.Range (60-187°F), .500 kW, 20 W/in2, 120 V

ARTMO-500/240V

€515.05

Stock: 6 semaines

Temp.Range (60-187°F), .500 kW, 20 W/in2, 240 V

E2 Moisture Resistant Enclosure

ARTMO-250E2TL/120V

€891.69

Stock: 6 semaines

Temp.Range (0 to 127°F), .250 kW, 20 W/in2, 120 V

ARTMO-250E2/120V

€891.69

Stock: 5 semaines

Temp.Range (60-187°F), .250 kW, 20 W/in2, 120 V

ARTMO-375E2TL/120V

€922.44

Stock: 6 semaines

Temp.Range (0-127°F), .375 kW, 20 W/in2, 120 V

† Tous les Montants indiqués Dans EUR
Notez: 1. Heaters with General Purpose Enclosures are UL Listed and CSA certified.

2. Heaters with Moisture Resistant Enclosures are CSA NRTL/C certified and are not intended for use in hazardous areas.
Exemple de commande: (1) ARTMO-250E2/120V Temp.Range (60-187°F), .250 kW, 20 W/in2, 120 V, €891.69

Constructeur de référence

Construisez votre numéro de pièce ci-dessous

(1) (2) (3)

ARTMO- /

RAZ

Descriptions des options de:

(1) Killowatt Rating Select:
250 pour .250 kW
375 pour .375 kW
500 pour .500 kW

(2) Temperature Range Select:
Rien (champ vide de congé) pour (60-187°F)
TH pour (60-240°F)
TL pour (0--127°F)

(3) Voltage Rating Select:
120V pour 120 Volts
240V pour 240 Volts
Notez: Toutes les combinaisons peuvent ne pas être valables, vérifiez la fiche technique pour les références valables.