Dual Input Process Meters with Math Functions

DP7800

^€833,13 DP7800

PASSEZ VOTRE COMMANDE

Dual Inputs with Programmable Math Functions
Process Voltage or Current Inputs
Programmable Ranges ± 200 mV to ± 200 V and 4-20 mA
Digital Tare (Zero) up to 50% of Span
Easily Programmed Span, 1000 to 30,000 Counts
Two Setpoints with Relay Closures, Standard
NEMA-4 Rated Bezel with Panel Gasket Seal

Instrumentation pour la mesure de pression et tension - Voir Les Produits Associés

Déscription

SPECIFICATIONS
Accuracy: ±0.01% of reading ±1 count of LSD
Range Programming: Solderless jumpers on rear of unit. Select 200 mV, ±2 V, ±20 V, ±200 V, and 4-20 mA
Conversion Rate: 3/second
Display: 5-digit, seven-segment LED 0.56" (14.3 mm) high
Limit Outputs: Standard dual form "A" relay rated 0.25 A at 28 V
Analog Output (optional): 0-10 Vdc @ 2.5 mV resolution. 0 V and 10 V points are programmable via front panel switches. Maximum drive capability ±2 mA The 4 mA and 20 mA points are programmable via front panel switches. 4-20 mA output, maximum load 600 Ohms
CMV: 1400 V Peak (ac or dc) between analog output ground and ac power line ground
Serial Interface (optional): ASCII RS-232 or RS-485 compatible; format 1 start bit, 8 data bits, 1 stop bit and no parity bits Baud Rates: 9600, 4800, 2400, 1200, 600, 300, 150 and 75 programmable from the front panel
Operating Temperature: -20 to 60°C (-4 to 140°F)
Storage Temperature: -25 to 85°C (-12 to 184°F)
Relative Humidity: 0% to 90%, Non-condensing
Power: 115 Vac (+15% -10%) @ 50 mA (47 to 500 Hz) Optional: 230 Vac (+15% -10%) @ 25 mA (47 to 500 Hz) Optional: 9-18 or 18-36 Vdc
Dimensions: 1.97 H x 3.80 W x 4.0" D (50 x 97 x 102 mm) (Rear Connectors add 0.5" to depth)
Panel Cutout: 1 /8 DIN 45 H x 92 mm W (1.77 H x 3.58" W)
Weight: 454 g (1 lb)

Examples of pricing for popular models is referenced in the "To Order" box. Use the "Part Number Builder" below to get pricing for all available models.

Placez votre commande(Veuillez spécifier la référence du produit)

Code d'article/ Desc.

Qté

Déscription

DP7800

Consultez le Service de ventes

Stock:

Dual input process voltage or current meter

DP7800-A10

Consultez le Service de ventes

Stock:

Dual input process voltage or current meter with 0-10 Vdc analog output

DP7800-S2

Consultez le Service de ventes

Stock:

Dual input process voltage or current meter with RS232 serial communications

† Tous les Montants indiqués Dans EUR

Constructeur de référence

Construisez votre numéro de pièce ci-dessous

(1)

DP7800

RAZ

Descriptions des options de:

(1) Options Select:
pour no options leave blank
-230VAC pour 230 Vac power
-DC9/18 pour 9 to 18 Vdc power
-DC18/36 pour 18 to 36 Vac power
-S2 pour ASCII RS232 serial interface
-S4 pour ASCII RS485 serial interface
-AMA pour 4 to 20 mA analog output
-A10 pour 0 to 10 Vdc analog output
Notez: Toutes les combinaisons peuvent ne pas être valables, vérifiez la fiche technique pour les références valables.