Discontinued - High Accuracy Digital Pressure Gauge, with Data Logging Capability

DPG4000

Digital Pressure Gauge with 0.05% Accuracy - Order online

^€1 345,06 DPG4000-30

PASSEZ VOTRE COMMANDE

As an alternative see the: DPG210 or the DPG280
RS232 Digital Communications Standard
Data Logging for up to 8500 Data Points with Optional Software
Very High Accuracy: ±0.05% FS
Calibration Certificate Included
Temperature Compensated: 0 to 50ºC
Displays in 18 Standard or Custom Engineering Units
Displays Ambient Temperature at the Touch of a Button in ºC or ºF
Large, Backlit, 5-Digit Display with 16.5 mm High Digits and 20-Segment Bar Graph
Rugged IP65 Stainless Steel Case
Min/Max Recall
Adjustable Tare Zeros Large System Offsets
Protective Rubber Boot Included on Battery Models

Jauges de pression - Voir Les Produits Associés

Déscription

Replaced by DPG280.

Click on this link if you need more information about Pressure Gauge.

The DPG4000 takes the concept of a test gauge to a new level. It combines the accuracy of digital technology with the simplicity of an analogue gauge, delivering performance, ease of use, and a feature set unmatched in the pressure measurement world. Setup of the DPG4000 is fast and straightforward, involving a menu driven display with minimal text and intuitive functions. The gauge is simple enough to be used anywhere in the world, without the need for multilingual displays.

It also incorporates a built in data logging function which when combined with the DPG4000-SW software allows it to function as a high performance pressure data logger. The unit can store up to 8500 data points which can then be downloaded and stored in a variety of formats including ASCII text, comma delimited text, and Micorsoft Excel Spreadsheet using the software. The software can also be used to configure a wide range of settings including logging interval, number of data points per run, capture mode and type of data.

SPECIFICATIONS (GAUGE)
(0 to 50ºC Unless Otherwise Noted)
Accuracy: ±0.05% FS positive pressure, ±0.25% FS vacuum/500 psi and below
Temperature Compensation: 0 to 50ºC (32 to 122ºF) to rated accuracy
Standard Engineering Units: psi, bar, kg/cm2, inH2O (4ºC, 20ºC or 60ºF), ftH2O (4ºC, 20ºC or 60ºF), cmH2O (4ºC and 20ºC), mH2O (4ºC and 20ºC), kPa, mbar, inHg, mmHg, torr
Media Compatibility: Liquids and gases compatible with 316 SS
Operating Temperature: -10 to 55ºC (14 to 131ºF)
Storage Temperature: -20 to 70ºC (-4 to 158ºF)
Dimensions: 111.1 H x 127 W x 38.1 mm D (4.375 x 5 x 1.50")
Input Port: 1/4 MNPT lower mount
Display: 5 digits, 16.5 mm (0.65") high
Window: Rugged Polycarbonate
Bar Graph: 0 to 100% in 20 segments
Power: 3 "AA" alkaline batteries (included); 24 Vdc power optional
Battery Life: 1500 hr without backlight (2000 hr at slow sample rate)
Low-Battery Indicator: Icon displayed near the end of battery life. Remaining battery life can also be displayed on bar graph.
(SOFTWARE AND DATA LOGGING)
Data Points: 8500 max (pressure only)
Reading intervals: 1, 2, 5, 10, 30 sec, 1, 2, 5, 10, 30 min, 1 hr
Data Format: Text, CSV or Excel format files
Logging Modes: Continuous, Trip High, Trip Low, Trip Range
Requirements: Microsoft Windows 2000 (SP4), XP (SP2) or Vista. Exporting data to excel files requires Microsoft Excel Version 2002 or later

† Tous les Montants indiqués Dans EUR
Notez: Each DPG4000 gauge comes with batteries (when applicable), protective rubber boot (with battery powered models), calibration certificate and operators manual.
Lower process fitting is standard. Contact Sales to order with optional rear fitting
Exemple de commande: (1) DPG4000-30 Battery powered digital pressure gauge with 0 to 30 psig range, €1 345,06

Produits Liés:

DPG4000-KIT
Achetez maintenant →
Discontinued - DPG4000 Pressure Calibration kit

DPG409 Digital Pressure Gauge
Achetez maintenant →
Digital Pressure Gauge and Transmitter