Clamp-on ultrasonic flow meter for liquid - Discontinued

FDT-40 Series

Clamp-on ultrasonic flow meter

PASSEZ VOTRE COMMANDE

Clamp-on ultrasonic flow meter with Bi-Directional Flow Measurement
Rugged, Aluminum Enclosure
Rate and Total Backlit Display
4 to 20 mA and Dual Alarm Outputs
USB Programming Port
RS485 MODBUS® Network Connection

Déscription

Discontinued. Replaced by UFM-DQG-Series

Find how a Ultrasonic flow meter works on this link.

The clamp-on ultrasonic flow meter of the FDT-40 Series do not come in contact with the internal liquid. The technology has inherent advantages over alternate devices including: low-cost installation, no pressure head loss, no moving parts to maintain or replace, no fluid compatibility issue, and a large, bi-directional measuring range that ensures reliable readings even at very low and high flow rates. FDT-40 Series is available in a variety of configurations that permit the user to select a meter with features suitable to meet particular application requirements.

Specifications
System
Liquid Types: Most clean liquids or liquids containing small amounts of suspended solids or gas bubbles
Velocity Range: Bi-directional to greater than 40 FPS (12 MPS)
Flow Accuracy:
    Larger Than 50 mm (2"): ±1% of reading or ±0.01 FPS (0.003 MPS), whichever is greater
    25 to 50 mm (1 to 2"): ±1% of reading or ±0.04 FPS (0.012 MPS), whichever is greater
¾" (19 mm) and Smaller: ±1% of full scale
Sensitivity Flow: 0.001 FPS (0.0003 MPS)
Repeatability: 0.5% of reading
Transmitter
Power Requirements (AC): 95 to 264 Vac 47 to 63 Hz @ 17 VA maximum standard, 20 to 28 Vac 47 to 63 Hz @ 0.35 A maximum (“-24VAC” models), 10 to 28 Vdc @ 5 W maximum (“-VDC” models)
Protection: Auto resettable fuse, reverse polarity and transient suppression
Display: Two line LCD, LED backlit; top row 18 mm (0.7") height, 7-segment; bottom row 9 mm (0.35") height, 14-segment
Icons: RUN, PROGRAM, RELAY1, RELAY2
Flow Rate Indication: 8-digit positive, 7-digit negative maximum; auto decimal, lead zero blanking
Flow Totalizer: 8-digit positive, 7-digit negative maximum (re-set via keypad press, software, network command or momentary contact closure
Enclosure NEMA 4 (IP65) Construction: Powder-coated aluminum, polycarbonate, stainless steel, polyurethane, nickel-plated steel mounting brackets
Size (Electronic Enclosure Only): 152 W x 112 H x 56 mm D (6.0 x 4.4 x 2.2")
Conduit Holes: (2) ½ NPT female (1) ¾ NPT female
Temperature: -40 to 85°C
Configuration: Via optional keypad or PC running software (Note: not all configuration parameters are available from the keypad – i.e. flow and temperature calibration and advanced filter settings)
Engineering Units Flow Meter: Feet, gallons, cubic feet, million gallons, barrels (liquid and oil), acre-feet, lbs, meters, cubic meters, liters, million liters, kg
Inputs/Outputs USB 2.0: For connection of a PC running configuration utility
    RS485: MODBUS RTU command set
    4 to 20 mA: 12-bit, internal power, can span negative to positive flow/ energy rates
    0 to 1000 Hz: Open-collector, 12-bit, can span negative to positive rates; square-wave or turbine meter simulation outputs
Two Alarm Outputs: Open-collector, configure as rate alarm, signal strength alarm or totalizer pulse
Transducers
Construction
    Standard (FDT-41 thru 46): NEMA 6 (IP67), PVC, PEI, Nylon cord grip, PVC cable jacket
    Temperature: -40 to 60°C (-40 to 140°F)
    FDT-41 thru 46 with “-HT” option, FDT-47 and FDT-48: NEMA 6 (IP67), CPVC, PEI, Nylon cord grip, PVC cable jacket
    Temperature: -40 to 90°C (-40 to 194°F)
    FDT-47 “-HT”: NEMA 6 (IP67), PTFE, polyimide, Nickel-plated brass cord grip, PFA cable jacket
    Temperature: -40 to 176°C (-40 to 350°F)
Frequency:
    FDT41 thru 46: 2 MHz
    FDT-47: 1 MHz
    FDT-48: 500 KHz
Cables: RG59 coaxial, 75 Ω or twin axial, 78 Ω (optional armored conduit)
Cable Length: Standard 6 m (20') 300 m (990') maximum in 3 m (10') increments; submersible conduit limited to 30 m (100')
Software Utilities Utilized to configure, calibrate and troubleshoot flow meters. Connection via USB A/B cable; software is compatible with Windows 2000, Windows XP, Windows Vista® and Windows® 7
RS485 Network All FDT-40 meters come equipped with RS485 drivers and utilize a MODBUS RTU command set (data can be returned in single-precision, doubleprecision, integer or floating point values). Up to 126 units products can be run on a single daisy-chain network and be individually queried for flow rate, positive flow accumulator, negative flow accumulator and signal strength. Flow accumulators can be cleared at discrete addresses or globally. The RS485 network is also compatible with direct to Excel, application.

Placez votre commande(Veuillez spécifier la référence du produit)

Ce que d'autres personnes ont acheté: quand vous voyez cette icône, cliquez dessus pour afficher une liste des produits que d'autres personnes ont achetés en plus de ce modèle.

Code d'article/ Desc.

Qté

Déscription

FDT-40

Consultez le Service de ventes

Stock:

Clamp-on ultrasonic Flow meter display 95 to 264 Vac

FDT-40-VDC

Consultez le Service de ventes

Stock:

Clamp-on ultrasonic Flow meter display 10 to 28 Vdc

FDT-40-24VAC

€2,554.00

Stock: 5 semaines

Clamp-on ultrasonic Flow meter display 24 Vac

Accessory Remote Transducers (Display Sold Separately)

Remote Transducers for ANSI Pipe

FDT-41-ANSI

Consultez le Service de ventes

Stock:

Transducer for 1/2" ANSI pipe

FDT-42-ANSI

€683.76

Stock: 1 semaine

Transducer for 3/4" ANSI pipe

FDT-43-ANSI

Consultez le Service de ventes

Stock:

Transducer for 1" ANSI pipe

FDT-44-ANSI

Consultez le Service de ventes

Stock:

Transducer for 1 1/4" ANSI pipe

FDT-45-ANSI

Consultez le Service de ventes

Stock:

Transducer for 1 1/2" ANSI pipe

FDT-46-ANSI

€794.94

Stock: En stock

Transducer for 2" ANSI pipe

FDT-41-ANSI-100FT

Consultez le Service de ventes

Stock:

Transducer for 1/2" ANSI pipe with 100 ft of cable

FDT-42-ANSI-100FT

Consultez le Service de ventes

Stock:

Transducer for 3/4" ANSI pipe with 100 ft of cable

FDT-43-ANSI-100FT

Consultez le Service de ventes

Stock:

Transducer for 1" ANSI pipe with 100 ft of cable

FDT-44-ANSI-100FT

Consultez le Service de ventes

Stock:

Transducer for 1 1/4" ANSI pipe with 100 ft of cable

FDT-45-ANSI-100FT

Consultez le Service de ventes

Stock:

Transducer for 1 1/2" ANSI pipe with 100 ft of cable

FDT-46-ANSI-100FT

Consultez le Service de ventes

Stock:

Transducer for 2" ANSI pipe with 100 ft of cable

FDT-41-ANSI-HT

€1,226.32

Stock: 7 semaines

High temperature transducer for 1/2" ANSI pipe

FDT-42-ANSI-HT

€1,226.00

Stock: 7 semaines

High temperature transducer for 3/4" ANSI pipe

FDT-43-ANSI-HT

€1,295.25

Stock: 7 semaines

High temperature transducer for 1" ANSI pipe

FDT-44-ANSI-HT

€1,296.00

Stock: 7 semaines

High temperature transducer for 1 1/4" ANSI pipe

FDT-45-ANSI-HT

€1,295.25

Stock: 7 semaines

High temperature transducer for 1 1/2" ANSI pipe

FDT-46-ANSI-HT

€1,375.00

Stock: 7 semaines

High temperature transducer for 2" ANSI pipe

FDT-41-ANSI-HT-100FT

€1,517.00

Stock: 7 semaines

High temperature transducer for 1/2" ANSI pipe and 100 ft of cable

FDT-42-ANSI-HT-100FT

€1,517.00

Stock: 7 semaines

High temperature transducer for 3/4" ANSI pipe with 100 ft of cable

FDT-43-ANSI-HT-100FT

€1,573.00

Stock: 7 semaines

High temperature transducer for 1" ANSI pipe and 100 ft of cable

FDT-44-ANSI-HT-100FT

€1,573.00

Stock: 7 semaines

High temperature transducer for 1 1/4" ANSI pipe and 100 ft of cable

FDT-45-ANSI-HT-100FT

€1,573.00

Stock: 7 semaines

High temperature transducer for 1 1/2" ANSI pipe and 100 ft of cable

FDT-46-ANSI-HT-100FT

€1,627.00

Stock: 7 semaines

High temperature transducer for 2" ANSI pipe and 100 ft of cable

Remote Transducers for Copper Pipe

FDT-41-CP

Consultez le Service de ventes

Stock:

Transducer for 1/2" Copper pipe

FDT-42-CP

€683.76

Stock: 1 semaine

Transducer for 3/4" Copper pipe

FDT-43-CP

Consultez le Service de ventes

Stock:

Transducer for 1" Copper pipe

FDT-44-CP

Consultez le Service de ventes

Stock:

Transducer for 1 1/4" Copper pipe

FDT-45-CP

Consultez le Service de ventes

Stock:

Transducer for 1 1/2" Copper pipe

FDT-46-CP

Consultez le Service de ventes

Stock:

Transducer for 2" Copper pipe

FDT-41-CP-100FT

Consultez le Service de ventes

Stock:

Transducer for 1/2" Copper pipe with 100 ft of cable

FDT-42-CP-100FT

Consultez le Service de ventes

Stock:

Transucer for 3/4" Copper pipe with 100 ft of cable

FDT-43-CP-100FT

Consultez le Service de ventes

Stock:

Transducer for 1" Copper pipe with 100 ft of cable

FDT-44-CP-100FT

Consultez le Service de ventes

Stock:

Transducer for 1 1/4" Copper pipe with 100 ft of cable

FDT-45-CP-100FT

Consultez le Service de ventes

Stock:

Transducer for 1 1/2" Copper pipe with 100 ft of cable

FDT-46-CP-100FT

Consultez le Service de ventes

Stock:

Transducer for 2" Copper piep with 100 ft of cable

FDT-41-CP-HT

€1,226.00

Stock: 7 semaines

High temperature transducer for 1/2" Coper pipe

FDT-42-CP-HT

€1,226.00

Stock: 7 semaines

High temperature transducer for 3/4" Copper pipe

FDT-43-CP-HT

€1,296.00

Stock: 7 semaines

High temperature transducer for 1" Copper pipe

FDT-44-CP-HT

€1,296.00

Stock: 7 semaines

High temperature transducer for 1 1/4" Copper pipe

FDT-45-CP-HT

€1,296.00

Stock: 7 semaines

High temperature transducer for 1 1/2" Copper pipe

FDT-46-CP-HT

€1,375.00

Stock: 7 semaines

High temperature transducer for 2" Copper pipe

FDT-41-CP-HT-100FT

€1,517.00

Stock: 7 semaines

High temperature transducer for 1/2" Coper pipe with 100 ft of cable

FDT-42-CP-HT-100FT

€1,517.00

Stock: 7 semaines

High temperature transducer for 3/4" Coper pipe with 100 ft of cable

FDT-43-CP-HT-100FT

€1,573.00

Stock: 7 semaines

High temperature transducer for 1" Coper pipe with 100 ft of cable

FDT-44-CP-HT-100FT

€1,573.00

Stock: 7 semaines

High temperature transducer for 1 1/4" Coper pipe with 100 ft of cable

FDT-45-CP-HT-100FT

€1,573.00

Stock: 7 semaines

High temperature transducer for 1 1/2" Coper pipe with 100 ft of cable

FDT-46-CP-HT-100FT

€1,627.00

Stock: 7 semaines

High temperature transducer for 2" Coper pipe with 100 ft of cable

Remote Transducers for Tubing

FDT-41-TUBE

Consultez le Service de ventes

Stock:

Transducer for 1/2" tubing

FDT-42-TUBE

Consultez le Service de ventes

Stock:

Transducer for 3/4" tubing

FDT-43-TUBE

Consultez le Service de ventes

Stock:

Transducer for 1" tubing

FDT-44-TUBE

Consultez le Service de ventes

Stock:

Transducer for 1 1/4" tubing

FDT-45-TUBE

Consultez le Service de ventes

Stock:

Transducer for 1 1/2" tubing

FDT-46-TUBE

Consultez le Service de ventes

Stock:

Transducer for 2" tubing

FDT-41-TUBE-100FT

Consultez le Service de ventes

Stock:

Transducer for 1/2" tubing with 100 ft of cable

FDT-42-TUBE-100FT

Consultez le Service de ventes

Stock:

Transducer for 3/4" tubing with 100 ft of cable

FDT-43-TUBE-100FT

Consultez le Service de ventes

Stock:

Transducer for 1" tubing with 100 ft of cable

FDT-44-TUBE-100FT

Consultez le Service de ventes

Stock:

Transducer for 1 1/4" tubing with 100 ft of cable

FDT-45-TUBE-100FT

€1,151.00

Stock: 7 semaines

Transducer for 1 1/2" tubing with 100 ft of cable

FDT-46-TUBE-100FT

Consultez le Service de ventes

Stock:

Transducer for 2" tubing with 100 ft of cable

FDT-41-TUBE-HT

€1,226.00

Stock: 7 semaines

High temperature transducer for 1/2" tubing

FDT-42-TUBE-HT

€1,226.00

Stock: 7 semaines

High temperature transducer for 3/4" tubing

FDT-43-TUBE-HT

€1,296.00

Stock: 5 semaines

High temperature transducer for 1" tubing

FDT-44-TUBE-HT

€1,296.00

Stock: 7 semaines

High temperature transducer for 1 1/4" tubing

FDT-45-TUBE-HT

€1,296.00

Stock: 7 semaines

High temperature transducer for 1 1/2" tubing

FDT-46-TUBE-HT

€1,375.00

Stock: 5 semaines

High temperature transducer for 2" tubing

FDT-41-TUBE-HT-100FT

€1,517.00

Stock: 7 semaines

High temperature transducer for 1/2" tubing with 100 ft of cable

FDT-42-TUBE-HT-100FT

€1,517.00

Stock: 7 semaines

High temperature transducer for 3/4" tubing with 100 ft of cable

FDT-43-TUBE-HT-100FT

€1,573.00

Stock: 7 semaines

High temperature transducer for 1" tubing with 100 ft of cable

FDT-44-TUBE-HT-100FT

€1,573.00

Stock: 7 semaines

High temperature transducer for 1 1/4" tubing with 100 ft of cable

FDT-45-TUBE-HT-100FT

€1,573.00

Stock: 7 semaines

High temperature transducer for 1 1/2" tubing with 100 ft of cable

FDT-46-TUBE-HT-100FT

€1,627.00

Stock: 7 semaines

High temperature transducer for 2" tubing with 100 ft of cable

Remote Transducers

FDT-47

€1,026.20

Stock: 1 semaine

Transducer for 2 to 24" pipe

FDT-47-100FT

€1,313.04

Stock: 5 semaines

Transducer for 2 to 24" pipe with 100 ft of cable

FDT-47-HT

€4,020.00

Stock: 7 semaines

High temperature transducer for 2 to 24" pipe

FDT-47-HT-100FT

€4,306.00

Stock: 7 semaines

High temperature transducer for 2 to 24" pipe with 100 ft of cable

FDT-48

€1,647.00

Stock: 7 semaines

Transducer for pipes over 24"

FDT-48-100FT

€1,937.00

Stock: 7 semaines

Transducer for pipes over 24" with 100 ft of cable

Accessories

FDT-40-PC-CABLE

€74.83

Stock: 5 semaines

Optional USB PC programming cable

FDT-40-CABLE GLAND

€39.22

Stock: 1 semaine

Optional cable gland

FDT-40-BHC

€103.82

Stock: 4 semaines

Brad Harrison connector for the FDT-40

FDT-GREASE

€76.53

Stock: 1 semaine

Replacement acoustic couplant 150 g (5.3 oz)

FDT-HT-GREASE

€171.95

Stock: 1 semaine

High temperature acoustic couplant 56 g (2 oz)

FDT-NS-GREASE

€76.53

Stock: En stock

Non-silicone acoustic couplant 79 g (2.8 oz)

† Tous les Montants indiqués Dans EUR
Notez: FDT-40 Series Flow meters come complete with operator’s manual.

Accessory transducers come complete with mounting gel.

Constructeur de référence

Construisez votre numéro de pièce ci-dessous

(1) (2) (3) (4)

FDT - -

RAZ

Descriptions des options de:

(1) Pipe and Tubing Sizes Select:
41 pour 1/2 Inch
42 pour 3/4 Inch
43 pour 1 Inch
44 pour 1 1/4 Inch
45 pour 1 1/2 Inch
46 pour 2 Inch
47 pour 2 to 24 Inch
48 pour Pipes over 24 inch

(2) Pipe and Tubing Material Select:
ANSI pour ANSI pipe
CP pour Copper pipe
TUBE pour Plastic tubing

(3) High Temperature Select:
Rien (champ vide de congé) pour None
-HT pour High temp transducers

(4) Cable Length Select:
Rien (champ vide de congé) pour Standard 6 m (20 feet)
-100FT pour 30 m (100 feet)
Notez: Toutes les combinaisons peuvent ne pas être valables, vérifiez la fiche technique pour les références valables.