Cookies sur les sites Web Omega
Nous utilisons des cookies sur ce site Web. Ces cookies sont indispensables au bon fonctionnement de notre site.
Si vous continuez sans modifier vos paramètres, nous supposerons que vous êtes heureux de recevoir tous les cookies de notre site Web.
Pour de plus amples informations à ce sujet, veuillez cliquer ici
Fermer
Panier  |  Contact  | 
NUMÉRO VERT 0805 541 038
INTERNATIONAL+33 01 57 32 48 17
Layer N Banner

Economical Purge Variable Area Flow Meters  - Discontinued

Fl-1200 Series

Economical Purge Variable Area Flow Meters - Fl1200 | Fl-1200 Series

Economical Purge Variable Area Flow Meters - Fl1200

Garantie 1 an
  • ±10% Full Scale Accuracy
  • ± 1/2% Full Scale Repeatability
  • Integral Needle Control Valve
  • Side Plate Construction
  • Direct Reading Air and Water Scales
  • 316 SS and Brass Construction Available
  • Shielded for Use in Pressurized Systems
  • Easy-to-Read 65 mm (2.6") Scale
Débitmètres à section variable, commutateurs et débitmètres à section variable - Voir Les Produits Associés

Déscription

The FL-1200 series has been discontinued. Please see the FLD100 Series as a possible alternative or contact our Flow Engineering department.

The FL-1200 flowmeters provide a low-cost means of flow rate indication. They are designed for applications where precise accuracy requirements for metering are not imperative. These meters are ideal for flow measurement applications of: purge service, sealed oil systems, bearing lubrication, cooling water indication and other associated applications.

SPECIFICATIONS
SCALES
Length: 65 mm (2.6")
Graduations: Direct reading in GPM water or SCFM air

CONSTRUCTION
Metering Tube: Borosilicate glass
Float: 316 stainless steel
Float Stops: stainless steel End Fittings and Tube Retaining Adaptor: Chrome-plated brass, 316 stainless steel
Side Plates: Chrome-plated brass
Packing Material: O-rings: Buna with Brass, FKM with stainless steel
Packing: Neoprene with brass, FKM with stainless steel

RATINGS
Pressure: 13.8 bar (200 psig) maximum
Temperature: 121°C (250°F) maximum. Fluid temperatures below 0°C (32°F) will cause frosting of the glass metering tube.
Connections: Horizontal female, 3/8 NPT
Accuracy: ±10% full scale
Repeatability: 0.5% full scale
Dimensions: 214 H x 38 W x 116 mm D (8.44 x 1.5 x 4.56")
Placez votre commande(Veuillez spécifier la référence du produit)
Code d'article/ Desc.
Qté
Déscription
Water Meters
FL-1211
783.95
Stock: 1 semaine
 
.15 - 1.5 GPM
Tous les Montants indiqués Dans EUR
Notez:

(OPTIONS SHOWN IN THIS "NOTE" ABOVE ARE PRICED IN US$)


We noticed you are from the US. Visit your local site for regional offers and live support.