integral or remote signal conditioner

FLSC-C3-LIQ Series

^€1 098,00 FLSC-C3-LIQ

PASSEZ VOTRE COMMANDE

DC or AC Powered
Pulse and Analog Outputs
High or Low Alarms (Optional)
20 Point Linearization
Factory Configuration Available
Windows® Configuration Software*

Débitmètres à turbines/roues à aubes - Voir Les Produits Associés

Déscription

The FLSC-C3-LIQ is a DC powered, microprocessor controlled transmitter. It outputs a pulse scaled per unit of flow, and analog signal proportional to flow rate. The FLSC-C3-LIQ-AL can be configured with high or low alarms and are designed for integral mounting to the FTB-100, FTB-200, and FTB-400 Series liquid turbines.

Specifications
Input Signal Type: Magnetic pickup, MCP pickup, contact closure, pulse
Input Frequency Range: 0.2 Hz to 4 KHz
Signal Level: 10 mV rms to 30 Vdc
Power Supply: 13 to 30 Vdc reverse polarity protection
Analog Output: 4 to 20 mA, 1 to 5V 24 mA overflow condition
Load Resistance: Maximum 650 Ω at 24 Vdc
Accuracy: ±0.02% of full scale
Temperature Drift: 40 ppm/degree C
Pulse Output: 0 to 5V, 0 to 10V, open collector, AC square. Internal pull up 10 kΩ. Recommended minimum load resistance 50 kΩ
Pulse Scaling: Divide by 1, 10 or 100 per flow unit Hi/Lo Alarm (-AL Model) Optional: Relay (2A, 30 Vdc), 0 to 5V, open collector (0.5A, 30V)
Communications: RS232 port for configuration and diagnostics
Operating Temperature: -40 to 85°C (-40 to 185°F)

Placez votre commande(Veuillez spécifier la référence du produit)

Ce que d'autres personnes ont acheté: quand vous voyez cette icône, cliquez dessus pour afficher une liste des produits que d'autres personnes ont achetés en plus de ce modèle.

Code d'article/ Desc.

Qté

Déscription

FLSC-C3-LIQ

€1 098,00

Stock: 1 semaine

DC powered signal conditioner 4 to 20 mA

FLSC-C3-AL-LIQ

€1 392,00

Stock: 8 semaines

DC powered signal conditioner 4 to 20 mA, alarm

OM-CONV-USB

€23,30

Stock: 1 semaine

USB to RS232 converter

FLSC-C-CABLE

€44,14

Stock: 1 semaine

Molex to 9-pin "D" connector

† Tous les Montants indiqués Dans EUR
Notez: Comes complete with operator’s manual.

For units with 100 to 240 Vac power, add suffix "-VAC" to model number

* Available for free download, cable sold separately.

Manuels de Produit:

Télécharger FLSC-C1-LIQ - Microprocessor Based Loop

Télécharger FLSC-C3-XX - DC Powered Microprocessor

Produits Liés:

FLSC-C1-LIQ Series
Achetez maintenant →
integral or remote signal conditioner