Liquid Flow Sensors for Visual Indication, Remote Sensing, and Flow Alarm

FPR-100

PASSEZ VOTRE COMMANDE

Very Economical
Pulse or Alarm Output Optional
For Flows from 0.1 to 30.0 GPM
Flow Switch Rotor Cannot Seize in “ON” State
Integral Mounting Holes Standard

Débitmètres à turbines/roues à aubes - Voir Les Produits Associés

Déscription

The FPR100 Series sensors are designed with a one-piece composite rotor, sturdy unibody construction, ceramic shafts, and superior sealing, to provide superior durability and economy. The FPR110 Series, with bright orange spinning rotors provide visual indication of flow only. The FPR120 Series provide visual indication and an adjustable 0.5 amp @ 110 Vac SPDT mechanical flow switch. The FPR130 Series provide visual indication and a square wave pulse output for use with remote ratemeters/totalizers, such as the DPF700 series meters. For panel mounting, all polypropylene units come with mounting ears which accept #8 self-tapping screws; all brass units come with mounting holes which accept #8-32 UNC-2B screws. For all FPR100 sensors, incoming flow can be directed to either port; a minimum of 8 inches of straight inlet pipe is required. Filtration of 150 microns is recommended.

SPECIFICATIONS
Wetted Parts: Brass or hydrolytically stable glass-reinforced polypropylene body; ceramic rotor pin; nylon composite rotor; polysulfone lens; and Buna O-ring with polypropylene body, FKM O-ring with brass or stainless steel body
Max Pressure: Polypropylene: 100 psig @ 21°C (70°F), 40 psig @ 82.2°C (180°F).
Brass or Stainless: 200 psig @ 21°C (70°F, 100 psig @ 100°C (212°F).
Max Operating Temperature: Polypropylene: -29°C to 82°C (-20°F to 180°F).
Brass: -29°:C to 100°C (-20°F to 212°F)
Max Pressure Drop:11 psid
Max Ambient Electronics Temperature: 65.6°C (150°F)
Max Liquid Viscosity:200 SSU
FPR120 Power:12 Vdc, 24 Vdc, or 110Vac (per model number)
FPR130 Pulse Output: pulse amplitude = dc power input
FPR130 Pulse Output Range: 15 Hz @ lowest flow rate of both ranges; 225Hz @ highest flow rate of both ranges
FPR120, FPR130 Repeatability: 2% of rate
FPR130 Power:4.5 to 24 Vdc @ 70mA max.
FPR120 SPDT Switch Rating (resistive):0.5 amps @ 110 Vac; 1amp @ 24 Vdc FPR120
Setpoint Deadband: 15% of rate
Weight: PP body: FPR110, 340 g (12 oz); FPR120, 454 g (1 lb); FPR130, 397 g (14 oz); Brass: FPR110, 680 g (1.5 lb), FPR-120, 907 g (2 lb)

Placez votre commande(Veuillez spécifier la référence du produit)

Code d'article/ Desc.

Qté

Déscription

Sensor with Visual Indication Only

Sensor with Visual Indication and Flow Switch

Sensor with Visual Indication and Pulse Output

DPF701

Consultez le Service de ventes

Stock:

Panel Meter for Rate or Total Indication

† Tous les Montants indiqués Dans EUR
Notez: Comes complete with operator's manual.

* Low Flow Ranges are only available with use of low flow adaptor (supplied).

† Pull-down resistor required.

Manuels de Produit:

Télécharger FPR110 Series - VISUAL FLOSENSOR FPR111, FPR112, FPR113, FPR114, FPR115

Télécharger FPR120 Series - Visual Flow Indicator w/Switch

Télécharger FPR130 Series - PULSE FLOSENSOR, FPR131,FPR132, FPR133,FPR134,FPR135

Télécharger DPF700

Produits Liés:

DPF700 Series
Achetez maintenant →
1/8 DIN 6-Digit Rate Meter/Totalizer - Discontinued

DPF70 Series
Achetez maintenant →
Frequency Input Ratemeter/Totalizer

CL535
Achetez maintenant →
CL535 - Discontinued