High Temperature Constant Wattage Heating Cable

KE Series

^€9,10 KE4-120

PASSEZ VOTRE COMMANDE

Continuous Exposure Rating up to 500°F
Low Watt Density
Parallel Resistance Heater
Cut-to-Length at the Job Site
Constant Watt Density
All Common Voltages Available
Moisture and Chemical Resistance
Continuous Electrical Ground
Designed for freeze protection and process temperature maintenance.

Systèmes de câbles de chauffage électrique - Voir Les Produits Associés

Déscription

Click on this link if you need more information about Industrial Heaters.

The KE Cable heating element is tension wrapped and covered with two layers of nonflammable Polyimide Film applied in reverse directions, then heat fused for moisture protection. A stainless steel and tinned copper sheath is then added for additional protection and electrical ground return path. The sheath is enclosed in a minimum 20 mil PFA abrasion and chemical resistant extruded jacket.

OMEGALUX™ KE Cable is a low Watt density electrical resistance heater. It is designed for freeze protection, viscosity and high temperature process control in Class 1, Groups B, C, and D, Division 2 Classified Areas as well as in corrosive environments. KE is used in asphalt plants, oil refineries, mines, chemical and petrochemical processing areas, other locations where corrosive atmospheres can occur. KE is equally suitable for applications in severe arctic cold.

CAUTION AND WARNING!
Fire and electrical shock may result if products are used improperly or installed or used by non-qualified personnel. See inside back cover for additional warnings.

Max. Circuit Length**-KE Series

Power	120V	208V	240V	277V	480V
4 Watts/ft	349"	606"	699"	806"	1398"
8 Watts/ft	247"	428"	494"	570"	988"
12 Watts/ft	202"	350"	403"	466"	807"

Placez votre commande(Veuillez spécifier la référence du produit)

Code d'article/ Desc.

Qté

Déscription

4 WATTS/FT

KE4-120

€9.10

Stock: 10 semaines

high temperature, constant wattage cable, 4 W/FT, 120V

KE4-240

€19.27

Stock: 1 semaine

high temperature, constant wattage cable, 4 W/FT, 240V

8 WATTS/FT

KE8-240

€18.89

Stock: 10 semaines

high temperature, constant wattage cable, 8 W/FT, 240V

12 WATTS/FT

KE12-120

€9.28

Stock: 11 semaines

high temperature, constant wattage cable, 12 W/FT, 120V

KE12-240

€19.27

Stock: 11 semaines

high temperature, constant wattage cable, 12 W/FT, 240V

Accessories

KE-UC-KIT

€60.54

Stock: 1 semaine

Termination Kit (for KE Series) One power input and two end terminals.

KE-KC-KIT

€59.37

Stock: 10 semaines

Termination Kit (for KE Series) Five end pouches and Five lead pouches. Five circuit kit.

FE-UC-KIT

€57.95

Stock: 11 semaines

Termination Kit (for FE Series)

FE-KC-KIT

€62.23

Stock: 11 semaines

Termination Kit (for FE Series)

SK-KIT

€28.67

Stock: 10 semaines

Splice Kit

FE-SK-KIT

€42.20

Stock: 11 semaines

Splice Kit (for FE Series)

RTV-SS

€12.29

Stock: 10 semaines

Silicone Sealant

† Tous les Montants indiqués Dans EUR
Notez:
*Price per foot. When ordering specify desired length in feet. 25 foot minimum.
**Maximum Circuit Lengths include end-to-end voltage variation of 10%. Longer runs may be used. Lengths are based on cable operating temperatures of 300°F. To complete your system the following accessories are recommended: (1) Termination kits for KE cable (see page B-30 for specifications), (2) control options - see Section P for a complete selection of controllers and thermostats.

Produits Liés:

KE and FE Accessories
Achetez maintenant →
Constant Wattage Heating Cable Accessories

Cable Accessories
Achetez maintenant →
Heat Cable Accessories: Splice & Tee Box, Power Connection Box