Conductivity Level Switches

LVCN4000 Series

LVCN4000 Series Conductivity Level Controllers

PASSEZ VOTRE COMMANDE

Accurate and Reliable Measurement
Easy Economical Installation
Rugged Construction
No Moving Parts
100 mm to 2 m Rod Lengths Available
Rod Can be Cut in the Field
ECTFE/ETFE Coating Available

Mesure de niveau - Voir Les Produits Associés

Déscription

The LVCN4000 Series Conductive Level Switch Controllers offer a wide range of customized options to meet any application’s need. LVCN4000 Series are designed to control the level of all conductive mediums with up to 2 different points of level control.

The LVCN4100 Series has one single rod and is able to control one point of level. The LVCN4200 Series can accommodate up to two rods and is able to control two points of levels. Both models feature a 24 Vdc-power supply and internal relay that replaces the need for an external relay. As with all other conductive probes, the rods for these two models can be custom cut and made with any process connection, such as threaded or sanitary. In addition, the electrodes operate with alternate current to prevent electrolyses.

SPECIFICATIONS
Power Supply: 24 Vdc (±10%)
Current Consumption: Max 2 VA
Temperature Range:
316 SS: -10 to 82°C
ECTFE/ETFE Coating: -10 to 120°C
Max Pressure: 290 psi (20 bar)
Wetted Materials: 316 SS
Enclosure Material: Glass-filled nylon standard, aluminum optional
Electrical Connection: Cable entry and ½ NPT conduit
Process Connection: ½, ¾, 1, 1½ NPT; tri-clamp or flange
Output: 5 A SPDT relay (250 Vac max)
Time Delay: 0.1 to 5 seconds nominal
Sensitivity Adjustment: 0.5 to 50 kΩ (potentiometer)
Electrodes: 316 SS
Electrode Length: 100 to 2000 mm
Output Voltage of Electrodes: 12 V to 100 Hz
Weight: Approx. 2.7 kg (6 lb) for 1.2 m
Protection Class: NEMA 4 (IP65)

Placez votre commande(Veuillez spécifier la référence du produit)

Ce que d'autres personnes ont acheté: quand vous voyez cette icône, cliquez dessus pour afficher une liste des produits que d'autres personnes ont achetés en plus de ce modèle.

Code d'article/ Desc.

Qté

Déscription

Accessories

TX4-100

€49.97

Stock: 1 semaine

4-Core 7/0.2 mm screened cable white, red, green & black with drain wire, 30 metres

LP-PS-1524

Consultez le Service de ventes

Stock:

DIN rail mount 24Vdc power supply. 15W, 0.63 Amp, 25mm wide. Powered by 85 to 260 Vac, 47 to 63 Hz

Trier par Référence

Code d'article

Qté

Code d'article

Qté

† Tous les Montants indiqués Dans EUR
Notez: Comes complete with operator's manual.

Custom models* are available, see Part Number Builder (below) for the most common configurations. Consult sales dept. for a quote for custom versions.

* Rods must be coated when using the probes above 82°C. All conductive applications must have a reference point, such as a metallic tank wall or another rod for non-metallic tanks.

Constructeur de référence

Construisez votre numéro de pièce ci-dessous

(1) (2) (3) (4) (5)

- -

RAZ

Descriptions des options de:

(1) No. of Sensing Rods Select:
LVCN41 pour single rod
LVCN42 pour dual rods

(2) Process Connection Select:
1 pour 1/2 NPT thread
2 pour 3/4 NPT thread
3 pour 1 NPT thread
4 pour 1-1/2 NPT thread
5 pour 1-1/2" Tri-Grip Sanitary
6 pour 2" flange ANSI 15016 316SS

(3) Enclosure Select:
1 pour glass-filled nylon with 1/2 NPT conduit and cable gland
2 pour aluminum die cast with 1/2 NPT conduit entry
3 pour aluminum die cast with cable gland

(4) Length Select:
C pour specify rod length
inches (96" max)

(5) Other Options Select:
Rien (champ vide de congé) pour none
ETFE pour ECTFE/ETFE coating
Notez: Toutes les combinaisons peuvent ne pas être valables, vérifiez la fiche technique pour les références valables.

Produits Liés:

LP-PS Series Power Supplies
Achetez maintenant →
Low Profile DIN Rail Power Supplies, 15 to 100 Watts for 5, 12, & 24 VDC