Metric Multiconductor Feedthroughs

MFT Metric Series

PASSEZ VOTRE COMMANDE

Pressure or Vacuum Applications
Seals Multiple Thermocouples and Protection Tubes
Available in Both NPT and ISO T/BPST Mounting Threads
Up to 16 Probes in 1 Fitting
Blank Sealing Plugs Included
3 to 16 Probes
416 SS Body and Cap
316 SS Ferrules Standard
PTFE Ferrules Available
OMEGALOKR Ferrules Standard
1 to 6 mm (0.040 to 1.4") Probe Diameters

Connecteurs de thermocouple et systèmes de panneaux - Voir Les Produits Associés

Déscription

These all-new multiconductor feedthroughs are designed for applications that require several sensors to pass through a wall or bulkhead at one opening or within a small area. Heavy-duty 416 SS construction allows use of this fitting in high-pressure or vacuum applications. Probes between 0.040" and 1/4" in diameter can be used in these feedthroughs. The maximum number of probes per feedthrough is 3 for 1/4" diameter probes, 5 for 3/16" diameter, 8 for 1/8" diameter, 16 for 1/16" diameter, and 16 for 0.040" diameter probes.

All multiconductor feedthroughs come standard with stainless steel ferrules. A stainless steel ferrule deforms and becomes permanent. If the probes have to be installed several times at different depths in the feedthrough, PTFE ferrules should be used. PTFE ferrules will not deform the probe sheath, which allows the same probe to be reused. The ferrules used in the feedthroughs are identical to the ferrules used in standard OMEGALOK compression fittings.

Placez votre commande(Veuillez spécifier la référence du produit)

Code d'article/ Desc.

Qté

Déscription

Thread is ISO/BPST

MFT-M10-3

€147.55

Stock: 4 semaines

1.0mm probe, 3 probes, 1/4in. Thread

MFT-M10-5

€180.48

Stock: 4 semaines

1.0mm probe, 5 probes, 1/4in. Thread

MFT-M10-6

€193.02

Stock: 4 semaines

1.0mm probe, 6 probes, 1/4in. Thread

MFT-M15-3

€135.75

Stock: 4 semaines

1.5mm probe, 3 probes, 1/4in. Thread

MFT-M30-3

€124.77

Stock: 4 semaines

3.0mm probe, 3 probes, 1/4in. Thread

Trier par Référence

Code d'article

Qté

Code d'article

Qté

† Tous les Montants indiqués Dans EUR
Notez: All fittings are supplied with stainless steel ferrules. If PTFE ferrules are required, add suffix "-PTFE" to the model number shown in the Order By Part Number fields. Add additional cost per ferrule. One ferrule needed for each conductor.
Exemple de commande: (1) MFT-M10-6 1.0mm probe, 6 probes, 1/4in. ISO/BPST Thread, €193.02

Constructeur de référence

Construisez votre numéro de pièce ci-dessous

(1) (2)

MFT

RAZ

Descriptions des options de:

(1) Diameter of Probe Select:
-M10 pour 1.0mm
-M15 pour 1.5mm
-M30 pour 3.0mm
-M45 pour 4.5mm
-M60 pour 6.0mm

(2) Number of Probes Select:
-3 pour 3 probes
-5 pour 5 probes
-6 pour 6 probes
-8 pour 8 probes
-10 pour 10 probes
-12 pour 12 probes
-16 pour 16 probes
Notez: Toutes les combinaisons peuvent ne pas être valables, vérifiez la fiche technique pour les références valables.

Produits Liés:

MFT Series
Achetez maintenant →
Metric Multiconductor Feedthroughs