Cookies sur les sites Web Omega Nous utilisons des cookies sur ce site Web. Ces cookies sont indispensables au bon fonctionnement de notre site. Si vous continuez sans modifier vos paramètres, nous supposerons que vous êtes heureux de recevoir tous les cookies de notre site Web. Pour de plus amples informations à ce sujet, veuillez cliquer ici
The new OM-USB-2404 Series are high-speed
USB data acquisition modules featuring four 24-bit
simultaneous analog voltage inputs with a sampling
rate of 50 kS/s per channel, and a ±10V
(OM-USB-2404-10) or ±60V (OM-USB-2404-60)
input range. These modules are fully compatible with
both USB 1.1 and USB 2.0 ports. An anti-alias filter
removes noise that may be present in the signals prior
to conversion.
Full 250 Vrms channel-to-channel and channel-to-ground
isolation protects the module and computer
from ground spikes, and ensures a reliable data stream.
An on-board LED indicates the status of the device.
Field connections are made to four 2-pole, detachable
screw terminals. The USB 2.0 high-speed driver
transfers data at rates up to 480 Mbps.
Power for the OM-USB-2404 Series comes from the
5V USB supply from your computer. No external power
is required.
Software
The OM-USB-2404 Series modules ship with an
impressive array of software, including the new
TracerDAQ®, a full-featured, out-of-the-box data
logging, viewing, and analysis application. Driver
support and detailed example programs are included
for Universal Library programming libraries for
Microsoft® Visual Studio® programming languages, and
other languages, including DASYLab®, and ULx for NI
LabVIEW® (comprehensive library of Vls and example
programs compatible with 32-bit and 64-bit LabVIEW
v8.5 through 2013) and InstaCal™ installation,
calibration and test utility-powerful solutions for
programmers and nonprogrammers alike. These
modules operate under Microsoft Windows® XP
(32-bit only) and VISTA/7/8 (32-bit and 64-bit)
operating systems.
SPECIFICATIONS ANALOG INPUT Number of Channels: 4 A/D Converter Resolution: 24-bit A/D Converter Type: Delta-Sigma with analog pre-filtering Sampling Mode: Simultaneous Sample Rate Range (fs) Minimum: 1.613 kS/s Maximum: 50 kS/s Full performance requires connections to a USB 2.0 high-speed host controller and USB 2.0 high-speed hubs. The maximum sample rate may be lower on USB 1.1 ports. Sample Rates (fs): (fM/256)/n, where n = 1, 2, … 31 Internal Master Timebase (fM) Frequency: 12.8 MHz Accuracy: ±100 ppm maximum Input Voltage Ranges (CH+ to CH-) OM-USB-2404-10: ±10V, nominal ±10.52V, typical ±10.3V, minimum OM-USB-2404-60: ±60V, nominal ±62.64V, typical ±61.5V, minimum Overvoltage Protection: ±100 V Input Coupling: DC Input Impedance (CH+ to CH-): 1 MΩ Input Noise OM-USB-2404-10: 70 µV rms OM-USB-2404-60: 320 µV rms Gain Drift: ±5 ppm/°C Offset Drift OM-USB-2404-10: ±24 µV/°C OM-USB-2404-60: ±150 µV/°C Post Calibration Gain Match (Channel-to-Channel 20 kHz): 0.22 dB maximum Crosstalk (1 kHz): -130 dB Phase Mismatch (Channel-to-Channel) OM-USB-2404-10: 0.075°/kHz maximum OM-USB-2404-60: 0.045°/kHz maximum Phase Nonlinearity (fs = 50 kS/s): 0.11° maximum Input Delay OM-USB-2404-10: 38.4/fs +3 µs OM-USB-2404-60: 38.4/fs +2.6 µs Passband Frequency: 0.453 · fs Passband Flatness (fs = 50 kS/s): ±100 mdB maximum Stopband Frequency: 0.547·fs Stopband Rejection: 100 dB Alias-Free Bandwidth: 0.453·fs -3 dB Pre-Filter Bandwidth (fs = 50 kS/s): 24.56 kHz Common Mode Rejection Ratio (CMRR), fin = 60 Hz: OM-USB-2404-10: 126 dB OM-USB-2404-60: 116 dB Spurious Free Dynamic Range (SFDR), 1 kHz, -60 dBFS: -128 dBFS Total Harmonic Distortion: 1 kHz, -1 dBFS: -99 dB 1 kHz, -20 dBFS: -105 dB
GENERAL Operating Temperature Range: 0 to 60°C (32 to 140°F), 10 to 90% RH non-condensing Storage Temperature Range: -40 to 85°C (-40 to 185°F), 5 to 95% RH non-condensing Communications: USB 2.0 Hi-Speed mode (480 Mbps) is recommended; otherwise USB 1.1 full-speed mode (12 Mbps) Current Consumption From USB: 500 mA maximum Channel-to-Earth Ground Isolation Continuous: 250 Vrms (measurement category II for measurements performed on circuits directly connected to the electrical distribution system) Withstand: 2300 Vrms (verified by a 5 second dielectric withstand test) Channel-to-Channel Isolation Continuous: 250 Vrms (measurement category II for measurements performed on circuits directly connected to the electrical distribution system) Withstand: 1390 Vrms (verified by a 5 second dielectric withstand test) Signal I/O Connector: Screw terminals Screw Terminal Wiring: 16 to 28 AWG copper conductor wire with 7 mm (0.28") of insulation stripped from the end Torque for Screw Terminals: 0.22 to 0.25 N·m (1.95 to 2.21 lb·in) Maximum Altitude: 2000 m (6562') Dimensions: 114 L x 140 W x 38 mm H (4.5 x 5.5 x 1.5") Weight: 544 grams (1.2 lb)
† Tous les Montants indiqués Dans EUR I> Notez: Comes complete with 2 m (6') USB cable and TracerDAQ software and user manual on CD. Exemple de commande: (1) SWD-TRACERDAQ-PRO TracerDAQ PRO software, €300.85
Manuels de Produit:
Télécharger
4 Channel Voltage Universal Input Data Acquisition Module
Télécharger
4 Channel Voltage Input Data Aquisition Module