OMEGATHERM™ High Temperature and High heat Conductive Paste

OT-201-1/2, OT-201-2, OT-201-16, OT-201-32

High Temperature and High heat Conductive Paste

PASSEZ VOTRE COMMANDE

Continuous Temperature to 200°C (392°F)
Extremely High Thermal Conductivity
Adheres to Most Surfaces

Accessoires - Voir Les Produits Associés

Déscription

OMEGATHERM™ thermal conducting paste is a high thermally conductive and high temperature thermal paste product. They are specially formulated for permanent and temporary bonding of thermocouples, thin film RTDs, thermistors and other temperature sensors, to most surfaces–metals, ceramics, glass, plastics, paper products.

OMEGATHERM™ 201 — is a very high thermally conductive filled silicone paste, ideally suited for many temperature measurement applications. This thick, grey, smooth paste wets most surfaces and will not harden on long exposure to elevated temperatures. It is rated for continuous use between -40 and 200°C (–40 and 392°F).

OMEGATHERM™ 201 provides an excellent means of conducting heat and expanding the heat-path area from a surface to a temperature measurement sensor, thus increasing the speed of response and improving accuracy. Some applications are:
a) Surface Measurement Probes — dab a small amount on the surface and push the sensor into this area.
b) Temporary bonding and encapsulating of temperature sensors — simply dab OMEGATHERM™ 201 onto the surface or in the cavity, plant the sensor in the paste, and tape to hold in place.

This versatile heat transfer paste is supplied in 14g and 56g jars, as well as in 450g and 900g containers.

Model No.	OT-201
Material	Silicone Grease
Continuous Temperature	200°C (392°F)
Cure	Not required
Adheres to Most*	Wets most Surfaces
Thermal conductivity (k)(BTU)in)/(hr)(ft 2) (°F)	Extremely High 16
Electrical Insulation Volume Resistivity ohm–cm	Very High 1014

*M=Metal PA=Paper Products C=Ceramic W=Wood PL=Plastic

Placez votre commande(Veuillez spécifier la référence du produit)

Ce que d'autres personnes ont acheté: quand vous voyez cette icône, cliquez dessus pour afficher une liste des produits que d'autres personnes ont achetés en plus de ce modèle.

Code d'article/ Desc.

Qté

Déscription

OT-201-1/2

Consultez le Service de ventes

Stock:

HIGH TEMPERATURE CONDUCTIVE PASTE, one 14g Jar

OT-201-16

€197.10

Stock: 2 semaines

HIGH TEMPERATURE CONDUCTIVE PASTE, 450g Kit

† Tous les Montants indiqués Dans EUR
Exemple de commande: (1) OT-201-16 High Temperature Conductive Paste, 450g., €197.10

Produits Liés:

OB-100, OB-200 Epoxy Series, & OT-201 Thermal Grease
Achetez maintenant →
Epoxies and Grease,Thermally Conductive

OMEGABOND® Air Set Cement Series
Achetez maintenant →
High Temperature Cements, Models, OB-300, OB-400, OB-500,