Modular Pressure Switches Compact Design Control Aplications

PSW9 Series

PASSEZ VOTRE COMMANDE

Economical Compact Modular Series
Silver Switch Contacts Rated at 10A at 250 Vac, 6A at 24 Vdc
DIN 43650 Standard (Included)
Easy Field Setting, with Hex 5 Allen Screw (Included)
Process Connections, 1/4 NPT Female, 7/16-20 UNF SAE-4, or G1/4 Female

Interrupteurs de pression - Voir Les Produits Associés

Déscription

The PSW9 Series pressure switches are used in OEM applications, hydraulic power units, heavy industrial, test equipment, and ship building. The compact modular design makes them useful for both mobile and stationary hydraulic applications. A SPDT micro switch will change state on increasing pressure at the setpoint, and will reset when the pressure decreases below the set-point by the amount of the deadband. The long pressure spring allows for a precise adjustable set-point. The PSW9 features a captive set screw for industrial applications

SPECIFICATIONS
Set-Point Repeatability: ±2% typical
Set-Point Adjustment: Upon delivery, set-point is in the middle of the adjustable range; Turn adjustment screw CW to increase, and CCW to decrease
Hysteresis/Deadband: Less than or equal to 10% of maximum full range
Contact Rating: Silver 10 A @ 250 Vac, 6 A @ 24 Vdc
Switching Frequency: Maximum 60/minute
Wiring
    Pin 1: Common
    Pin 2: Normally closed
    Pin 3: Normally open
Electrical Connection: DIN 43650 with PG9, clamping range 6 to 8 mm (0.23 to 0.31")
Ambient Temperature Range
    Piston Switch: -20 to 80°C (-4 to 176°F)
Wetted Parts
    Process Fitting: Aluminum (AIMg4.5Mn)
    Piston: Steel (100Cr6)
    Housing: Aluminum (AIMg4.5Mn)
    Dynamic Seal: See table on next page, Buna-N or FKM
    Adjustment Screw: Stainless steel (1.4305)
    Electrical Plug: Polyamid
Environmental: NEMA 4 (IP65)
Shipping Weight: 175 g (0.39 lb)

Placez votre commande(Veuillez spécifier la référence du produit)

Code d'article/ Desc.

Qté

Déscription

1/4 NPT

PSW9-AA10DB