Discontinued - Thin Film Pressure Sensor with 100 mV Output, Excellent Long Term Stability

PX602 and PX612

^€419,59 PX602-015GV

PASSEZ VOTRE COMMANDE

As an alternative see the PX309 Series or the PX02 Series or the "Pressure Transducer Builder"
All Stainless Steel Case
Small and Lightweight
NEMA 4 Rated
Connector or Cable Models

Capteurs - Voir Les Produits Associés

Déscription

SPECIFICATIONS
Excitation: 10 Vdc (5 to 10 Vdc limits)
Output: 0 to 100 mV @ 10 Vdc
Sensitivity: 10 mV/V
Input Impedance: 1500 Ω
Output Impedance: 100 Ω
Insulation Resistance: 100 MΩ @50 Vdc
Accuracy: ±0.4% BFSL
Hysteresis: ±0.2%
Repeatability: ±0.05%
Stability: ±1%/year
Zero Balance: ±1%
Durability: 100 million cycles
Operating Temp: -48 to 91°C (-55 to 195°F)
Compensated Temp: -29 to 82°C (-20 to 180°F)
Thermal Zero Effect: ±0.07% FS/°C
Thermal Span Effect: ±0.07% FS/°C
Proof Pressure:
    15 to 2000 psi = 200%
    3000 to 5000 psi = 150%
    7500 to 20,000 psi = 120%
Burst Pressure:
    15 to 2000 psi = 800%
    3000 to 20,000 psi = 500%
Gauges: Thin film polysilicon
Diaphragm: 17-4 PH stainless steel
Case: 300 Series stainless steel
Pressure Connection:
    15 to 10,000 psi: ¼ NPT
    15,000 and 20,000 psi: ⁹⁄16-18 UNF Aminco fitting
Electrical Connection: 0.9 m (36") braided-shield PVC cable or PT06F8-4S-R connector
Weight: 71 g (2.5 oz.) without cable
Response time: 5 ms
Construction: Sealed units (except PX602 ≤ 500 psi is vented to room)

† Tous les Montants indiqués Dans EUR
Notez: Comes with complete operator’s manual.
15,000 and 20,000 psi models supplied with female AMINCO fitting.

Produits Liés:

DP25B-S
Achetez maintenant →
Load Cell or Strain Gauge meter

DP41-S
Achetez maintenant →
High Performance Strain Gauge Meter, High Resolution 6-Digit Display

PS Series
Achetez maintenant →
Pressure Pulse Snubbers