Discontinued - Industrial Wet/Wet Differential Pressure transducer High Over Pressure Capacity, 0-2 bar to 0-350 bar

PXM80 Series, Metric, mV/V Output

^€1 537,00 PXM80MD0-002BARDV

PASSEZ VOTRE COMMANDE

As an alternative see the PX3005-DIFF series or the MM-Configurable series
Low Differential Pressure at High Line Pressure - 100 bar Standard Optional up to 345 bar
Available in mv/V Output, 0-5V Output, and 4-20ma Output
FM Intrinsically Safe
All Stainless Steel Construction
Sealed for Harsh Environments
High Overpressure

Transducteurs de pression - Voir Les Produits Associés

Déscription

OMEGA’s PXM80 Series is a heavy duty, wet/wet, differential pressure transducer available in ranges from 0-2 to 0-350 bar. The Series is available with either of three outputs; mV/V, amplified 0-5 Vdc or 4-20 mA. These are suitable for interface with most PLCs and computer based control systems. An extremely high over pressure capacity of 100 bar or 150% of capacity (whichever is greater) make the PXM80 an extremely durable transducer. FM approved intrinsically safe rating is standard. The all stainless steel construction, high over pressure protection and FM approval, make the PXM80 Series differential pressure transducers a high reliability transducer in harsh industrial environments.

SPECIFICATIONS

mV/V OUTPUT
Excitation: 10 Vdc (15 V max)
Output: 2 mV/V nominal
Bridge Resistance: 350 Ohms
Zero Balance: ±1% FSO

5Vdc OUTPUT
Excitation: 24-32 Vdc
Output: 0-5 Vdc ±10% adj.
Zero Balance: 0 V ±10% adj

4-20 mA OUTPUT
Excitation: 10-40 Vdc
Output: 4-20 mA ±10% adj
Max Loop Resistance: (Input Voltage-12) x 50
Zero Balance: 4 mA, +10% -2%

COMMON SPECIFICATIONS
Linearity: ±0.25% FSO
Hysteresis: ±0.10% FSO
Repeatability: ±0.1% FSO
Agency Approvals: FM Intrinsically Safe IS/I.II.III/1/CDEFG - Standard
Operational Temp Range:
mV/V: -73 to +163°C (-100 to +325°F)
Amplified: -46 to +107°C (-50 to +225°)
Compensated Temp Range:+17 to +71°C (60 to +160°F)
Thermal Effects: Zero: =2 bar : 0.009% FSO/°C Zero: =2 bar: 0.013% FSO/°C (4-20 mA) Span: =2 bar : 0.009% Rdg/°C
Line Pressure: 138 bar or 150% of rated pressure, whichever is greater
Burst Pressure: 414 bar minimum
Wetted Parts: =2 bar: 17-4 PH Stainless Steel
Pressure Port: G 1 /4 <70 bar G 1 /8 70 bar and up
Electrical Termination: Style 0 = 3 m cable Style 1 = PTIH-10-6P (or Equiv) Style 5 = Metal Terminal Box Style 6 = micro DIN Mating Connector: Style 1 PT06F-10-6S (not included) Style 6: Mating Connector Included

If you need to order the 4-20ma uutput version Click Here 4-20ma output
If you need to order the 0-5V output version Click Here 0-5V output

Please be sure to review the pdf "Spec Sheet" for full product information
The "To Order" Box reflects a sample of many possible configurations available in this series.

† Tous les Montants indiqués Dans EUR

Produits Liés:

DP25B-S
Achetez maintenant →
Load Cell or Strain Gauge meter

TXDIN1600S
Achetez maintenant →
Load Cell and strain gauge amplifier/transmitter