Cookies sur les sites Web Omega
Nous utilisons des cookies sur ce site Web. Ces cookies sont indispensables au bon fonctionnement de notre site.
Si vous continuez sans modifier vos paramètres, nous supposerons que vous êtes heureux de recevoir tous les cookies de notre site Web.
Pour de plus amples informations à ce sujet, veuillez cliquer ici
Fermer
Nous
appeler
maintenant
Panier  |  Contact  | 
0805 541 038  | 
NUMÉRO VERT 0805 541 038
INTERNATIONAL+33 01 57 32 48 17
Layer N Banner

Parallel Pneumatic Grippers Miniature Series

RPM Series - Mini Parallel 2-Jaw Gripper

Parallel Pneumatic Grippers Miniature Series | RPM Series - Mini Parallel 2-Jaw Gripper

Parallel Pneumatic Grippers Miniature Series

€627,44 RPM-1M

PASSEZ VOTRE COMMANDE
  • Pneumatic Parallel Mini Gripper Available in 3 Stroke Lengths
  • Precision Gripper-Preloaded V Roller Bearings Eliminate Side Play Resulting in Excellent Part Positioning
  • Gripper Accuracy of 0.05 mm (0.002") and Repeatability of 0.03 mm (0.001")
  • Rated Grip Force @ 7 Bar (100 psi), 36 N (8 lbs)
  • Compact Design for Gripping Small Parts in Small Places
  • Rigid and Low Friction Design Allows for Longer Finger Lengths for Use on Delicate Parts
  • Group Multiple Grippers in Close Array Using Top Manifold Mounting Surface
  • Up to 5 Million Cycles in Typical Operation and 10 Million with Maintenance
  • Operating Temperature -35 to 80°C (-30 to 180°F)
  • System Requires 3 to 7 bar (40 to 100 psi) Dry Filtered (40 micron or Better) Air Supply
  • Requires 4-Way, 2 Position Valve and Regulator for Delicate Parts
Mouvement - Voir Les Produits Associés

Déscription

Find how a pneumatic gripper works on this link.

RPM Series Gripper is a miniature pneumatic parallel gripper with excellent parallelism and accuracy between the gripper mounting surface and jaw surface. Jaws are front mounted and are supported with 'Dual-V" roller bearings to provide low friction motion and are preloaded for maximum support and zero side play. RPM Pneumatic Grippers are top mounted and have air ports on the side or top for manifold mounting to keep the air line away from the gripper area. These grippers are available in stroke lengths from 3.2 to 6.3mm with a gripper force of 36 N (8 lbs).

Pneumatic linear motion components are double acting air cylinders that require a dry air supply with filtering to 40 microns or better. For best control of pneumatic components, flow control valves (regulating out) should be installed to regulate the speed of the device.

Specifications
Pneumatic Specifications
    Pressure Operating Range: 3 to 7 bar (40 to 100 psi)
    Cylinder Type: Double acting
    Dynamic Seals: Internally lubricated Buna-N
    Valve Required to Operate: 4-way, 2-position
Air Quality Requirements
    Air Filtration: 40 micron or better
    Air Lubrication: Not necessary*
    Air Humidity: Low moisture content (dry)
Temperature Operating Range
    Buna-N Seals (Standard): -35 to 80°C
    Viton® Seals (Optional): -30 to 120°C
Maintenance Specifications*
Expected Life:
    Normal Application: 5 million cycles
    With Preventative Maintenance: 10+ million cycles*
Field Repairable: Yes
Seal Repair Kits Available: Yes
*Addition of lubrication will greatly increase service life.
Placez votre commande(Veuillez spécifier la référence du produit)

Ce que d'autres personnes ont acheté: quand vous voyez cette icône, cliquez dessus pour afficher une liste des produits que d'autres personnes ont achetés en plus de ce modèle.

Code d'article/ Desc.
Qté
Déscription
  
RPM-1M
€627,44
Stock: 13 semaines
 
Mini Parallel Pneumatic Gripper with 3.2 mm (0.13") Stroke
Cliquez pour agrandir / réduire une liste d'achat connexeRPM-2M
RPM-2M
€614,36
Stock: 13 semaines
 
Mini Parallel Pneumatic Gripper with 4.8 mm (0.19") Stroke
  
RPM-3M
€1 058,00
Stock: 1 semaine
 
Mini Parallel Pneumatic Gripper with 6.3 mm (0.25") Stroke
Accessories
  
SLKT-121
€63.08
Stock: 1 semaine
 
Standard seal repair kit
  
SLKT-142V
€75.09
Stock: 13 semaines
 
Top air port manifold seal kit (Viton® only)
  
OM-AIR-M22270403
€16.26
Stock: 1 semaine
 
Mini-swivel elbow air fitting, 3M thread and 4mm tubing barb
† Tous les Montants indiqués Dans EUR
We noticed you are from the US. Visit your local site for regional offers and live support.
Stay here.
Go to the the US site >