Heavy Weight Oil Flanged Immersion Heaters

TMO Series

PASSEZ VOTRE COMMANDE

Rugged Steel Sheath
Low Watt Density 6 1/2" W/in2
1.2 to 8.4 kW
3 & 5 Inch, 150 Ib. Steel Flange

Thermoplongeurs - Voir Les Produits Associés

Déscription

More information about how a Immersion Heater works in this link or general information about industrial heater elements.

FEATURES
Rugged construction, Sturdy 0.475" diameter elements welded to steel flanges provide superior rigidity and strength. Heavy duty jumper straps and terminal posts assure permanent tightness of connection’s carrying capacity.

High conductivity elements — Filled with highest purity blends of magnesium oxide refractory (MgO) compacted to a rock hard density to insure maximum thermal conductivity, maximum electrical resistance, and assure long element life.

Heavy coil construction– Watt density on the heating coil is designed for low watt density operation by increasing the coil diameter and length to give maximum coil surface temperature, providing longer coil life.

APPLICATIONS
Heating heavy, viscous oils reduces their viscosity, permitting better pumpability for transfer operations. Lowering the viscosity allows increased system flows for any given horsepower. Transfer system designs can employ smaller motor and drive components ensuring optimum system economy.

Preheating permits use of less expensive fuel oils, allows easier pumping and provides better atomization, increasing combustion efficiency.

CAUTION AND WARNING!
Fire and electrical shock may result if products are used improperly or installed or used by non-qualified personnel. See inside back cover for additional warning.

kW	Dim. B in. (cm)	Wt.4 Ib. (kg)	E1 General Purpose Enclosure¹	Dim.N³ in. (cm)
3 Inch-150 Lb. Steel Flange, 3 Steel Sheath Elements — 6.5 W/in2
1.2	25 3/16 (64)	17 (8)	TMO-3012L/240V/3P	1 (3)
1.65	33 1/16 (84)	18 (8)	TMO-3016L/240V/3P	1 (3)
2	40 9/16 (103)	20 (9)	TMO-3021L/**/3P	1 (3)
2.5	48 1/16 (122)	21 (10)	TMO-3024L/240V/3P	1 (3)
5 Inch-150 Lb. Steel Flange, 6 Steel Sheath Elements — 6.5 W/in2
1.5	18 1/16 (46)	27 (12)	TMO-6015L/240V/3P	1 (3)
1.8	19 13/16 (50)	30 (14)	TMO-6018L/240V/3P	1 (3)
2.4	25 3/16 (64)	32 (15)	TMO-6024L/240V/3P	1 (3)
3.3	33 1/16 (84)	33 (15)	TMO-6033L/**/3P	1 (3)
4.2	40 9/16 (103)	34 (15)	TMO-6042L/**/3P	1 (3)
5	48 1/16 (122)	37 (17)	TMO-6049L/**/3P	1 (3)
5.4	52 1/16 (132)	38 (17)	TMO-6054L/**/3P	1 (3)
6	58 3/8 (148)	40 (18)	TMO-6060L/**/3P	1 (3)
6.9	65 1/16 (165)	42 (19)	TMO-6069L/**/3P	1 (3)
7.2	68 5/8 (174)	43 (20)	TMO-6072L/**/3P	1 (3)
8.4	78 1/16 (198)	46 (21)	TMO-6084L/**/3P	1 (3)

/** Designate voltage, i.e. insert 240V for 240 Vac or 480V for 480 Vac.
Note: Larger flange sizes and kW ratings and power supplies are available. contact OMEGALUX.
1 Heaters with General Purpose and Moisture Resistant Enclosures are UL Listed and CSA Certified.
2 Heaters with Explosion Resistant Enclosures are CSA NRTL/C certified and are not intended for use in hazardous areas.
3 E1 enclosure “N” designates conduit size, E2/E3/E4 enclosures “N” designates NPT threat size.
4 Weights:
A. For Wt. of 3" flange with E2 enclosure, add 3 lbs. to Wt. of E1 enclosure.
B. For Wt. of 5" flange with E3 or E4 enclosure, add 7 lbs. to Wt of E1 enclosure.

Placez votre commande(Veuillez spécifier la référence du produit)

Code d'article/ Desc.

Qté

Déscription

Example part numbers are shown below. For additional configurations see the Part Number Builder below this table.

TMO-6084L/480V/3P

Consultez le Service de ventes

Stock:

Heater, 8.4 kW, 480 V, 6 steel sheath elements, 3 phase power

† Tous les Montants indiqués Dans EUR

Constructeur de référence

Construisez votre numéro de pièce ci-dessous

(1) (2) (3)

TMO- L/ /3P

RAZ

Descriptions des options de:

(1) Number of Steel Sheath Elements Select:
3 pour 3 Steel Sheath Elements
6 pour 6 Steel Sheath Elements

(2) Wattage Select:
012 pour 1.2 kW
016 pour 1.65 kW
021 pour 2 kW
024 pour 2.5 kW
015 pour 1.5 kW
018 pour 1.8 kW
024 pour 2.4 kW
033 pour 3.3 kW
042 pour 4.2 kW
049 pour 5 kW
054 pour 5.4 kW
060 pour 6 kW
069 pour 6.9 kW
072 pour 7.2 kW
084 pour 8.4 kW

(3) Voltage Select:
240V pour 240 V
480V pour 480 V
Notez: Toutes les combinaisons peuvent ne pas être valables, vérifiez la fiche technique pour les références valables.