Thermistor Temperature Transmitter
“Smart” in-head transmitter

TX206TH

Thermistor Temperature Transmitter

^€84,17 TX206TH

PASSEZ VOTRE COMMANDE

Supports Many Thermistor Types
2-Wire, Loop Powered
4 to 20 mA Output
PC Configurable Ranges (requires programmer)
High Stability

Éléments, sondes et ensembles de thermistance - Voir Les Produits Associés

Déscription

The TX206TH is a cost effective "smart" in head transmitter that accepts thermistor temperature sensors and converts sensor output over a configured range to a standard industrial (4 to 20) mA transmission signal.

A variety of thermistor types are available when using the configuration software: select thermistor type, temperature range, units and burnout direction, without requiring calibration equipment. PC configuration is performed quickly using our new USB port driven configurator by simply connecting two clips to the TX206TH loop terminals and following the software instructions. Calibration set up may be saved as a file on the PC for later use.

Alternatively, a single push button and LED indicator allows the user to configure transmitter range against a manually set input condition. A red LED is included to help guide the user. The LED also operates as a sensor error indicator.

Transmitters can be factory configured for any range specified at the time of order, removing the need for user configuration.

Specifications (at 20°C)

INPUT
Sensor Type: Thermistor
Sensor Connection: Screw terminal
Minimum span: 5 °C
Accuracy (typical): ± 0.2 °C ±0.2 % of reading
Thermal Drift: ± 0.02 % / °C

OUTPUT
Output Type: 2 wire (4 to 20) mA current loop
Output range: (4.0 to 20.0) mA
Output Connection: Screw Terminal
Maximum output: 21.5 mA
Minimum output: <3.75 mA
Accuracy: (mA output /2000) or 5 µA (Whichever is the greater)
Loop Voltage effect: 0.2 µA / V
Thermal drift: ±2 µA / °C
Maximum output load: [(Vsupply-10)/21]K Ω;(Example: 666 Ω @ 24 V)

THERMISTOR TYPES
Please refer to configuration software for complete up to date list: 3KB (44005, 44030), 5KB (44007, 44034), 10KB (44016,44036) 10KH (44006, 44031), 30KH (44008), 2252KB (44004, 44033)

GENERAL SPECIFICATION
Response time: 1 second
Start-up time: 2 seconds ( I out < 4 mA during start up)
Warm-up time: 1 minute to full accuracy
Power Supply: (10 to 30) Volts dc

ENVIRONMENTAL
Ambient operating range: (-40 to +85) °C
Ambient storage temperature: (-50 to +90) °C
Ambient humidity range: (10 to 90) % RH non condensing

PHYSICAL
Dimensions: 43 mm diameter; 21 mm height
Mounting: Two 5.5 mm Ø holes on 33 mm centres, will fit a DIN standard termination head.
Weight: 31 g (encapsulated)

Placez votre commande(Veuillez spécifier la référence du produit)

Ce que d'autres personnes ont acheté: quand vous voyez cette icône, cliquez dessus pour afficher une liste des produits que d'autres personnes ont achetés en plus de ce modèle.

Code d'article/ Desc.

Qté

Déscription

TX206TH

€84,17

Stock: 1 semaine

Thermistor temperature transmitter

TX206TH-UKFS

Consultez le Service de ventes

Stock:

Thermistor temperature transmitter, factory scaled for specific thermistor type and temperature range. (specify requirements in order comments)

USB-CONFIG-TH

€100,57

Stock: 5 semaines

USB Interface module (required for user scaling via PC/Software

† Tous les Montants indiqués Dans EUR

Produits Liés:

B-2k2, B-3k, B-5k, B-10k Series
Achetez maintenant →
Industrial Thermistor Temperature Sensors
with Protection Head and Fabricated Thermowell

Thermistor Temperature Transmitter “Smart” in-head transmitter

TX206TH

Thermistor Temperature Transmitter
“Smart” in-head transmitter