DIN Rail Mount Transmitters with RFID Communications

TXDIN400

^€108,36 TXDIN402

PASSEZ VOTRE COMMANDE

Isolated & Linearized
High Accuracy with 16-Bit Conversion
TXDIN401 Temperature Transmitter Accepts Pt100 or Ni100 RTD Inputs and Types J/K/T/E/R/S/B/N Thermocouples
TXDIN402 Accepts Process Voltage, Current or Resistance Input
User Configurable via TX400-RFID (NFC) Programmer with PC software or Free Download Google App - "Direct Link"
Transmitters Have 2624 Word Non-Volatile Memory (Circular Buffer) for Data-Logging with User-Selectable Sampling Time

Instruments de mesure et contrôle de processus - Voir Les Produits Associés

Déscription

The TXDIN401 and TXDIN402 DIN rail mount transmitters transform a temperature or process signal into a linearized 2-wire loop-powered 4 to 20 mA output. Model TXDIN401 is a temperature transmitter that accepts Pt100 or Ni100 RTD and Types J/K/T/E/R/S/B/N thermocouples. Model TXDIN402 is a process input transmitter that accepts voltage, current or resistance input. The characteristics of these converters ensure high precision on the reading scale with 16-bit conversion. The 4 to 20 mA output can be scaled based on the desired input range.

The programming procedure uses an RFID (NFC) mode with the dedicated TX400-RFID programmer that allows the user to make all calibrations and settings quickly and without the need to power and connect up the transmitter. Simply connect the TX400-RFID programmer to the USB port of your PC, start the RF Programmer configuration software and place the transmitter on top of the TX400-RFID programmer to establish communications. These transmitters are also provided with a data logging function for the input signal. Transmitters have a non-volatile memory (circular buffer) for data-logging with user-selectable sampling time. The user selects the sampling time (1 to 3600 seconds) and then each time the 4 to 20 mA loop powers the device, the input value is stored to non-volatile memory.

An additional programming tool is the Omega Brand Google App - "Direct Link" relying on RFID/NFC connectivity and allowing straightforward programming without wirings by Android devices.

Using the TX400-RFID programmer along with the RF Programmer configuration software (software is a free download from OMEGA) the user can:
    • Completely configure the transmitter including scaling the 4 to 20 mA output to desired input range
    • Implement field calibration to compensate for gain and offset errors
    • Download logged data to PC for visualization and printing

Specifications
RTD Input Types and Ranges (TXDIN401 Only)
    Pt100 (a = 0.00385): 2, 3, or 4-wire connection, -200 to 600°C (-328 to 1112°F)
    Ni100 (a = 0.00618): 2, 3, or 4-wire connection, -60 to 180°C (-76 to 356°F)
Thermocouple Input Types (TXDIN401 Only): J/K/T/E/R/S/B/N/mV
Process Input Types and Ranges (TXDIN402 Only):
    Voltage: 0 to 10 V
    Current: 0 to 20 mA (4 to 20 mA default)
    Resistance: 0 to 4000 Ω
Output Resolution: 2 µA
Over-Range Output: fs + 5°C
Under-Range Output: fs - 5°C
Output Error (Failure): Selectable between 21 mA or 3.8 mA
Current Output Protection: 30 mA approx
Rejection: 50 to 60 Hz
Maximum Transmission Error: 0.1% FS or 0.2°C whichever is greater
Sampling Time: 300 msec
Response Time (10 to 90%): 600 msec
Non-Volatile Memory (Circular Buffer) for Data Logging: 2624 word
Cable Resistance: 20 Ω max
Temperature Coefficient: < 100 ppm
Power: 2-wire loop powered; operating range 6 to 32 Vdc
Isolation: Galvanic, 1 KVac input/output
Operating Environment: -40 to 85°C (-40 to 185°F), 30 to 90% RH (non condensing)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Mounting: 3 mm DIN rail
Material: Enclosure, polycarbonate; front panel, silicone
Enclosure Rating: NEMA 1 (IP20) according to CE, EN 61000-6-4, EN 61000-6-2
Programming: Wireless with RFID technology (NFC)
Software: Windows® XP/7/8 (32-bit and 64-bit), Windows 10 (64-bit)
Connection: Screw terminals
Weight: 30 g (1.05 oz) approx
Dimensions: 90 H x 18 W x 64 mm D (3.54 x 0.71 x 2.52")

Placez votre commande(Veuillez spécifier la référence du produit)

Code d'article/ Desc.

Qté

Déscription

TXDIN401

€102,59

Stock: 1 semaine

DIN rail mount RFID temperature transmitter

TXDIN402

€108,36

Stock: 1 semaine

DIN rail mount RFID voltage, current and resistance input transmitter

TX400-RFID

€170,43

Stock: 1 semaine

RFID programmer

RAIL-35-1

€17,49

Stock: 1 semaine

35 mm (1.4") DIN rail, 1 m (3.3') length

RAIL-35-2

€32,97

Stock: 1 semaine

35 mm (1.4") DIN rail, 2 m (6.6') length

† Tous les Montants indiqués Dans EUR
Notez:
TX400-RFID programmer is supplied with complete User Guide and USB interface cable. TXDIN401 and TXDIN402 transmitters are supplied with complete User Guide. The RF programmer PC configuration software is a free download from OMEGA.

Google App "Direct Link" can be free downloaded from Google Store or get a copy from our software link here.

Exemple de commande: (1) TX400-RFID RFID programmer, €170,43 plus (1) TXDIN401 DIN rail mount RFID temperature transmitter, €102,59, €170,43 + 102,59 = €273,02

Manuels de Produit:

Télécharger DIN Rail Mount TC/RTD Input Tranmsitter RFID

Télécharger DIN Rail Mount Voltage/Current/Resistance Input Transmitter RFID

Télécharger RF Programmer for TX400, TXDIN400 Series

Logiciel:

Télécharger RF Programmer Software for TX400 and TXDIN400

Télécharger Omega Brand NFC Apps – Direct Link

Produits Liés:

TX400-Series
Achetez maintenant →
Miniature Head Mount Temperature Transmitters with RFID Communications