Cookies sur les sites Web Omega Nous utilisons des cookies sur ce site Web. Ces cookies sont indispensables au bon fonctionnement de notre site. Si vous continuez sans modifier vos paramètres, nous supposerons que vous êtes heureux de recevoir tous les cookies de notre site Web. Pour de plus amples informations à ce sujet, veuillez cliquer ici
High Definition Display
• 0, 90, 180, & 270 degree position adjustments.
• Monitoring, programming, and diagnostics view.
• Extensive diagnostics with flashing red or white backlight
• Supports 7 languages Local operator interface (LOI)
• 3 optical buttons; up, down and enter.
• Dynamically adaptive to wear or accumulation of dirt.
• Immune to interference from ambient light sources.
• Useable with or without gloves. Configuration
• From the LOI through guided user menu.
• OMSET and HART modem.
• HHC, DCS or AMS via HART. Mounting/Installation
• For installation in zone 0, 1, 2 and zone 20, 21, 22 and in Class 1, Division 1 and 2 applications.
• Hardware assessed for use in SIL 2 applications.
• Mounting on 1.5”–2” pipe bracket or on wall / bulkhead. Application
• Linearized temperature measurement with TC and RTD sensors e.g. Pt100 and Ni100.
• HART communication and 4...20 mA analog PV output for individual, difference or average temperature measurement of up to two RTD or TC input sensors.
• Conversion of linear resistance to a standard analog current signal, e.g from valves or Ohmic level sensors.
• Amplification of bipolar mV signals to standard 4...20 mA current signals.
• Up to 63 transmitters (HART 7) can be connected in a multidrop communication setup. Technical Characteristics
• NAMUR NE43 and NE89.
• HART protocol revision can be changed by user configuration to either HART 5 or HART 7 protocol.
Specifications Environmental Conditions Operating Temperature: -40 to 85°C (with silicone O-ring) Operating Temperature: -20 to 85°C (with FKM Oring) Storage Temperature: -40 to 85°C Calibration Temperature: 20 to 28°C Relative Humidity: 0 to 100% RH (condensing) Protection Degree:IP54/IP66/IP68/type 4X Mechanical Specifications Dimensions: Ø 110 mm Dimensions (HxWxD), Aluminum: 109.3 x 145 x 126 mm Dimensions (HxWxD), Stainless Steel: 107.4 x 145 x 124 mm Weight Approx., Aluminum/Stainless Steel: 1.3/2.8 kg Wire Size: 0.13 x 1.5 mm2/AWG 26 to 16 stranded wire Screw Terminal Torque: 0.4 Nm Vibration: EC 60068-2-6 2 to 25 Hz: ±1.6 mm 25 to 100 Hz: ±4 g Display Resolution: 96 x 64 pixels Number of Digits: 5 Backlight: Selectable ON/OFF Backlight Color: Selectable white or red Common Specifications Supply Supply Voltage, DC: Ex ia, Intrinsically Safe: 10 (12 - with backlight)...30 Vdc Supply Voltage, DC: Other: 10 (12 - with backlight)...35 Vdc Isolation Voltage
Isolation Voltage, Test/Working: 1.5 kVAC/50 Vac Response Time Response Time (Programmable): 1 to 60 s Signal/Noise Ratio: > 60 dB Programming:HART Start-Up Time, Transmitter to display:Max. 5 s Long-Term Stability, Better Than: ±0.1% of span/year Accuracy:Better than 0.05% of selected range Signal Dynamics, Input: 22 bit Signal Dynamics, Output: 16 bit EMC Immunity Influence: < ±0.1% of span Extended EMC Immunity: NAMUR NE21, A Criterion, Burst: < ±1% of span Input Specifications Common Input Specifications Max. Offset: 50% of selected max. value RTD Input RTD Type: Pt50/100/200/500/1000; Ni50/100/120/1000 Cable Resistance per Wire: 5 Ω (up to 50 Ω per wire is possible with reduced measurement accuracy) Sensor Current: Nom. 0.2 mA Linear Resistance Input Linear Resistance Min/Max: 0 to 7000 Ω TC Input Thermocouple Type: B, E, J, K, L, N, R, S, T, U, W3, W5, LR Cold Junction Compensation (CJC): Constant, internal or external via a Pt100 or Ni100 sensor Voltage Input Measurement Range: -800 to 800 mV Min. Measurement Range (Span): 2.5 mV Input Resistance:10 MΩ Output Specifications Current Output Signal Range: 4 to 20 mA Min. Signal Range: 6 mA Load (@ Current Output): ≤ (Vsupply - 10) / 0.023 [Ω] Load Resistance, with Backlight: ≤ (Vsupply - 12) / 0.023 [Ω] Sensor Error Indication: Programmable 3.5 to 23 mA NAMUR NE43 Upscale/Downscale: 23 mA/3.5 mA Common Output Specifications Updating Time: 440 ms HART Protocol Revisions: HART 7 and HART 5 Observed Authority Requirements EMC: 2014/30/EU EAC: TR-CU 020/2011 Approvals EU RO Mutual Recognition Type Approval: MRA0000009 ATEX 2014/34/EU: DEKRA 15 ATEX 0058 X IECEx: IECEx DEK 15.0039 X FM: FM16US0009X/FM16CA0010X CSA: 70024231 EAC Ex TR-CU 012/2011: RU C-DK.GB08.V.01316 INMETRO: DEKRA 15.0014 X NEPSI: GYJ15.1336X, GYJ15.1337X and GYJ15.1338X SIL: Hardware assessed for use in SIL applications
† Tous les Montants indiqués Dans EUR I> Notez: Link to Hart Programming Unit to get all Tech Reference & Drivers.